GBJ8005 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 8.0A GLASS PASSIVATED BRIDGE RECTIFIER

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBJ8005 THRU GBJ810
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
8.0 Amperes
FEATURES
• Plastic package has UL Flammability
Glassification 94V-0
• Glass passivated chip junctions
• High case dielectric strength of 1500 VRMS
• High surge current capability
• High temperature soldering guaranteed
260℃/10 seconds, 0.375”(9.5mm) lead length
GBJ
3.0×45 ^O
29.7-30.3
φO ^3.1-3.4
4.4-4.8
3.4-3.8
MECHANICAL DATA
• Case: molded plastic body
• Terminal: Plated leads solderable per MIL-STD-750
Method 2026
• Mounting position: Any (Note 3)
• Mounting Torque: 6 in – 1bs max.
• Weight: 0.26 ounce, 7.4 gram
2.5±0.2
2.0-2.4
0.9-1.1
9.8-10.2 7.3-7.7 7.3-7.7
2.7-3.1
0.6-0.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
GBJ
8005
GBJ
801
GBJ
802
GBJ
804
GBJ
806
GBJ
808
GBJ
810
Maximum Reverse Peak Repetitive Voltage
V_RRM
50 100 200 400 600 800 1000
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560 700
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current, At TC=100℃ (Note 1)
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
rated load (JEDEC Method)
Rating for Fusing (t＜8.3ms)
V_DC
50 100 200 400 600 800 100
I_(AV)
8.0
I_FSM
170
I²t
166
Maximum Instantaneous Forward Voltage drop
Per bridge element 4.0A
V_F
1.0
Maximum DC Reverse Current at
TA=25℃
rated DC blocking voltage per element _TA=125℃
I_R
5.0
500
Typical Junction Capacitance, per let (Note 2)
C_J
211.0
94.0
Typical Thermal Resistance (Note 4)
R_JA
3.5
Operating Junction Temperature Range
T_J
(-55 to +150)
Storage Temperature Range
T_STG
(-55 to +150)
Notes: 1. Unit case mounted on 3.2×3.2×0.12” thick (8.2×8.2×0.3cm) A1. Plate heatdink
2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat
Transfer with #6 screws
4.Unit mounted in free air, no heat sink on P.C.B. 0.5×0.5”(12×12mm) copper pads 0.375” (9.5mm) lead length
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
Volts
μA
pF
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com