GBJ10005 Datasheet, PDF (1/2 Pages) Diodes Incorporated – 10A GLASS PASSIVATED BRIDGE RECTIFIER

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBJ10005 THRU GBJ1010
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
10.0 Amperes
FEATURES
• Plastic package has UL Flammability
Glassification 94V-0
• Glass passivated chip junctions
• High case dielectric strength of 1500 VRMS
• High surge current capability
• Ideal for printed circuit boards
• High temperature soldering guaranteed
260℃/10 seconds, 0.375”(9.5mm) lead length
GBJ
3.0×45 ^O
29.7-30.3
φO ^3.1-3.4
4.4-4.8
3.4-3.8
MECHANICAL DATA
• Case: molded plastic body
• Terminal: Plated leads solderable per MIL-STD-750
Method 2026
• Mounting position: Any (Note 3)
• Mounting Torque: 6 in – 1bs max.
• Weight: 0.15 ounce,4.0 gram
2.5±0.2
2.0-2.4
0.9-1.1
9.8-10.2 7.3-7.7 7.3-7.7
2.7-3.1
0.6-0.8
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS
GBJ
10005
GBJ
1001
GBJ
1002
GBJ
1004
GBJ
1006
GBJ
1008
Maximum Reverse Peak Repetitive Voltage
V_RRM
50 100 200 400 600 800
Maximum RMS Voltage
V_RMS
35
70 140 280 420 560
Maximum DC Blocking Voltage
V_DC
50 100 200 400 600 800
Maximum Average Forward At TC=100℃(Note 1)
Rectified Current,
At TA=40℃(Note 2)
I_(AV)
10
5.0
Peak Forward Surge Current
8.3ms single half sine wave superimposed on
I_FSM
170
rated load (JEDEC Method)
Rating for Fusing (t＜8.3ms)
I²t
142
Maximum Instantaneous Forward Voltage drop
Per bridge element 5.0A
V_F
1.0
Maximum DC Reverse Current at
TA=25℃
rated DC blocking voltage per element _TA=125℃
I_R
5.0
250
Typical Junction Capacitance, per let
(Measured at 1.0MHz and applied reverse voltage of
C_J
60
4.0V)
Typical Thermal Resistance (Note 2 and 3)
R_JC
Operating Junction Temperature Range
T_J
2.2
(-55 to +150)
Storage Temperature Range
T_STG
(-55 to +150)
Notes: 1. Unit mounted on 150mm×150mm×1.6mm A1. Plate heatsink
2. Unit mounted on P.C.B. With 0.5×0.5”(1.2×1.2mm) copper pads and 0.375”(9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum
Heat transfer with #6 screw
GBJ
1010
1000
700
100
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
Volts
μA
pF
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com