G2SB20 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Glass Passivated Single-Phase Bridge Rectifier

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
G2SB20 THRU G2SB100
VOLTAGE RANGE
CURRENT
200 to 1000 Volts
1.5 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Glassification 94V-0
• Glass passivated chip junction
• High case dielectric strength
• Typical IR less than 0.1 A
• High surge current capability
• Ideal for printed circuit boards
• High temperature soldering guaranteed:
260℃/10 seconds, 0.375”(9.5mm) lead length
5lbs.(2.3kg) tension
GBL
20.7×45^O
20.7 - 20.9
1.9 - 2.5
+~~~
2.03 - 2.41
0.9 - 1.1
4.8 - 5.3
MECHANICAL DATA
• Case: molded plastic body over passivated junctions
• Terminal: Plated leads solderable per MIL-STD-750
Method 2026
• Mounting position: Any
• Weight: 0.071 oz, 2.0g
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOLS G2SB20 G2SB60 G2SB80
Maximum Reverse Peak Repetitive Voltage
V_RRM
200
600
800
Maximum RMS Voltage
V_RMS
140
Maximum DC Blocking Voltage
V_DC
200
Maximum Average Forward
Rectified Output Current At
TC=80℃ (Note 1)
TA=25℃
I_(AV)
420
560
600
800
2.0
1.5
Peak Forward Surge Current single sine-wave
superimposed on rated load
(JEDEC Method)
Maximum Instantaneous Forward drop
Per leg At 0.75 Amperes
I_FSM
V_F
80
1.00
Maximum Reverse Current at rated
DC blocking voltage per element
TA=25℃
TA=125℃
I_R
5.0
300
Rating for Fusing (t＜8.3ms)
I²t
27
Typical Thermal Resistance Per Leg
R_ΘJA
R_ΘJC
40
12
Operating Junction Storage and Temperature Range
T_J ,T_STG
-55 to +150
Notes: 1.Unit mounted on P.C.B. at 0.375” (9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads
G2B100
1000
700
1000
UNIT
Volts
Volts
Volts
Amps
Amps
Volts
μA
A²s
℃/W
℃
E-mail: [e-mail] Web Site: www.cnmic.com