FBPC35005WN Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – SINGLE PHASE BRIDGE RECTIFIER

SINGLE PHASE BRIDGE RECTIFIER
FBPC35005WN THRU FBPC3510WN
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
35 Ampere
FEATURES
• Low cost
• This series is UL recognized under component
index file number E127707
• High forward surge current capability
• Fast switching for high efficiency
• Integrally molded heatsink provide
very low thermal resistance
• High isolation voltage from case to leads
• High temperature soldering guaranteed:
260℃ / 10 seconds,at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
• Case: Molded plastic body
• Terminal: Plated 0.04″(1.02mm)diameter
• Polarity: Polarity symbols marked on case
• Mounting: Thru hole for #10 screw, 20 in,-lbs Torque max.
• Weight: 0.47 ounce, 13.4 gram
BR-35WN
0.732( 18.6)
0.692( 17.6)
0.205( 5.2)
0.197( 5.0)
METAL HEAT SINK
EXOPY CASE
AC
+
-
AC
0.732( 18.6)
0.692( 17.6)
1.13( 28.8)
1.11( 28.2)
0.47( 11.9)
0.43( 10.9)
0.32( 8.2)
0.30( 7.8)
0.78( 19.8) MIN
0.042( 1.10) DIA
0.038( 0.97) TYP
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25^OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOL
FBPC
35005WN
FBPC
3501WN
FBPC
3502WN
FBPC
3504WN
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100
200
400
Maximum RMS Voltage
V_RMS
35
70
140
280
Maximum DC Blocking Voltage
V_DC
50
100
200
400
Maximum Average Forward Rectified Output
Current, at TC = 50℃ (Note 1,2)
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Rating for Fusing (t<8.3mS)
Maximum Instantaneous Forward Voltage Drop
per Bridge element at 17.5 A
I_(AV)
I_FSM
I²t
V_F
25
300
664
1.2
Maximum DC Reverse Current at Rated
DC Blocking Voltage per element
TA = 25 ℃
TA = 100 ℃
I_R
10
1.0
FBPC
3506WN
600
420
600
FBPC
3508WN
800
560
800
1.3
FBPC
3510WN
1000
700
1000
Maximum DC Reverse recovery time(Note3)
Isolation Voltage from case to lead
T_rr
V_ISO
150
250
500
2500
Typical Thermal Resistance (Note 1,2 )
R_θJc
2.0
Operating Temperature Rang
T_J
(-65 to +150)
Storage Temperature Rang
T_STG
(-65 to +150)
Notes:
1. Unit mounted on 9” x 3.5” x 4.6” (23cm x9cm x 11.8cm) AL finned Plate
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum beat transfer efficiency with #10 screw
3. Reverse recovery test conditions: IF=0.5A,IR=1.0A,IRR=0.25A
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
Volts
µA
mA
NS
V_AC
O_C/W
O_C
O_C
1
E-mail: [e-mail] Web Site: www.cnmic.com