FBPC25005WN Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – SINGLE PHASE BRIDGE RECTIFIER

SINGLE PHASE BRIDGE RECTIFIER
FBPC25005WN THRU FBPC2510WN
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
25 Ampere
FEATURES
• Low cost
• This series is UL recognized under component
index file number E127707
• High forward surge current capability
• Fast switching for high efficiency
• Integrally molded heatsink provide
very low thermal resistance
• High isolation voltage from case to leads
• High temperature soldering guaranteed:
260℃ / 10 seconds,at 5 lbs. (2.3kg) tension.
0.732(18.6)
0.692(17.6)
0.205(5.2)
0.197(5.0)
0.46(11.7)
0.41(10.5)
0.78(19.8)MIN
0.732(18.6)
0.692(17.6)
1.13(28.8)
1.11(28.2)
1.13(28.8)
0.47(11.9) 1.11(28.2)
0.43(10.9)
METAL HEAT SINK
EXOPY CASE
MECHANICAL DATA
• Case: Molded plastic body
• Terminal: Plated 0.04″(1.02mm)diameter
• Polarity: Polarity symbols marked on case
• Mounting: Thru hole for #10 screw, 20 in,-lbs Torque Max.
• Weight: 0.47 ounce, 13.4 gram
• MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25^OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
SYMBOL
FBPC
25005WN
FBPC
2501WN
FBPC
2502WN
FBPC
2504WN
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
100
200
400
Maximum RMS Voltage
V_RMS
35
70
140
280
Maximum DC Blocking Voltage
V_DC
50
100
200
400
Maximum Average Forward Rectified Output
Current, at TC = 50℃ (Note 1,2)
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
Rating for Fusing (t<8.3mS)
Maximum Instantaneous Forward Voltage Drop
per Bridge element at 12.5 A
I_(AV)
I_FSM
I²t
V_F
25
300
373
1.2
Maximum DC Reverse Current at Rated
DC Blocking Voltage per element
TA = 25 ℃
TA = 100 ℃
I_R
10
1.0
FBPC
2506WN
600
420
600
0.042(1.10)DIA
0.038(0.97)TYP
FBPC
2508WN
800
560
800
FBPC
2510WN
1000
700
1000
1.3
Maximum DC Reverse recovery time(Note3)
Isolation Voltage from case to lead
T_rr
V_ISO
150
250
500
2500
Typical Thermal Resistance (Note 1,2 )
R_θJc
2.0
Operating Temperature Rang
T_J
(-65 to +150)
Storage Temperature Rang
T_STG
(-65 to +150)
Notes:
1. Unit mounted on 5” x 6” x 4.9” (12.8cm x15.2cm x 12.4cm) AL finned Plate
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum beat transfer efficiency with #10 screw
3. Reverse recovery test conditions: IF=0.5A,IR=1.0A,IRR=0.25A
UNIT
Volts
Volts
Volts
Amps
Amps
A²s
Volts
µA
mA
NS
V_AC
O_C/W
O_C
O_C
1
E-mail: [e-mail] Web Site: www.cnmic.com