English
Language : 

DRH401 Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – PRESS FIT AUTOMOTIVE RECTIFIER (HITACHI)
PRESS FIT AUTOMOTIVE RECTIFIER (HITACHI)
DRH401 THRU DRH406
VOLTAGE RANGE
CURRENT
100 to 400 Volts
40.0 Amperes
TECHNICAL SPECIFICATION:
FEATURES
• Low Leakage
• Low forward voltage drop
• High current capability
• High forward surge current capacity
• Glass passivated chip
MECHANICAL DATA
• Technology: Vacuum soldered
• Case: Copper case
• Polarity: As marked of case bottom
• Lead: Plated Ni lead, solderable per
MIL-STD-202E method 208C
• Mounting: Press Fit
• Weight: 0.11 ounces, 3.15 grams
Positive
Negative
0.782± 0.012
(20.00± 0.30)
0.886± 0.012
(22.50± 0.30)
HC-1
0.32± 0.004
(? 8.10± 0.10)
0.059± 0.002
(? 1.5± 0.10)
0.149± 0.004
(3.80± 0.10)
0.467-0.470
(11.87-11.96)
Dimensions in inches and (millimeters)
Epoxy
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
• Single Phase, half wave, 60HZ, resistive or inductive load
• For capacitive load derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current,
At Tc=105℃
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Rating for fusing (t<8.3ms)
Maximum instantaneous Forward Voltage at 100A
Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage
TA=100℃
SYMBOLS
VRRM
VRMS
VDC
IO
IFSM
I2t
VF
IR
Typical Thermal Resistance
RθJC
Operating and Storage Temperature Range
TJ,TSTG
Notes:
1. Enough heatsink must be considered in application.
DRH401
100
70
100
DRH402
200
140
200
DRH403
300
210
300
DRH404
400
280
400
40
500
1038
1.08
5.0
450
0.8
(-65 to +175)
DRH406
600
420
600
UNIT
Volts
Volts
Volts
Amps
Amps
A2S
Volts
UA
℃/W
℃
E-mail: sales@cnmic.com Web Site: www.cnmic.com