BRS1005 Datasheet, PDF (1/3 Pages) MIC GROUP RECTIFIERS – SINGLE-PHASE BRIDGE RECTIFIER

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
BRS1005 THRU BRS1010
VOLTAGE RANGE 50 to 1000 Volts
CURRENT
10 Amperes
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 ^oC/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5 in.-lbs torque max.
l Weight:0.20ounce, 5.62 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
0.52( 13.2)
0.48( 12.2)
BRS-10
0.07( 1.8) x45 +
AC
0.16(
0.14(
4.1)
3.6)
DIA
AC
0.52( 13.2)
0.48( 12.2)
0.77( 19.6)
0.73( 18.5)
-
Metal Heat Sink
0.77( 19.6)
0.73( 18.5)
0.30( 7.6)
0.25( 6.4)
0.85( 21.6) MIN
0.75( 19.0) MIN
0.08( 2.0) MIN
0.052( 1.3) DIA
0.048( 1.2) TYP
Dimensions in inches and (millimeters)
SYMBOLS BRS1005 BRS101 BRS102 BRS104 BRS106 BRS108 BRS1010 UNITS
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
50
100
200
400
600
35
70
140
280
420
Maximum DC Blocking Voltage
VDC
Maximum Average Forward ^{TC=55℃(Note1)}
Rectified Output Current, at T_C=90℃(Note1)
I(AV)
TA=50℃(Note2)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
Rating for Fusing (t<8.3ms)
I²T
Maximum Instantaneous Forward Voltage at 5.0A
VF
Maximum DC Reverse Current at rated ^TA=25℃
DC blocking voltage
TA=150℃
IR
Isolation Voltage from case to leads
VISO
Typical Thermal Resistance (Note 1)
RθJA
Typical Thermal Resistance (Note 1)
RθJC
Operating Temperature Range
TJ
Storage Temperature Range
TSTG
50
100
200
400
600
10.0
5.0
6.0
150
93
1.1
5.0
1.0
2500
13
5
-55 to +150
-55 to +150
NOTES:
1. Unit mounted on 8.7”×8.7”×0.24” thick (22×22×0.6 cm) Al. plate.
2. Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads.
800
1000
Volts
560
700
Volts
800
1000
Volts
Amps
Amps
A²S
Volts
µAmps
mAmps
µAmps
℃/W
℃/W
℃
℃
E-mail: [e-mail] Web Site: www.cnmic.com
1/3