6A05S Datasheet, PDF (1/2 Pages) MIC GROUP RECTIFIERS – AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER

AXIAL SILASTIC GUARD JUNCTION STANDARD RECTIFIER
6A05S THRU 6A10S
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
1.0 Ampere
FEATURES
• Low coat construction
• Low forward voltage
• High forward surge current capability
• High temperature soldering guaranteed:
260/10 secods.0.375”(9.5mm)lead length
MECHANICAL DATA
• Case: Transfer molded plastic
• Epoxy: UL94V-O rate flame retardant
• Polarity: Color band denotes cathode end
• Lead: Plated axial lead, solderable per MIL-STD-202E method 208C
• Mounting position: Any
• Weight: 0.06ounce, 1.7 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25^OC ambient temperature unless otherwise specified
• Single Phase, half wave, 60Hz, resistive or inductive load
• For capacitive load derate current by 20%
1.0(25.4)
MIN.
0.360(9.1)
0.340(8.6)
1.0(25.4)
MIN.
R-6S
0.052(1.3)
0.048(1.2) ^DIA.
0.280(7.2) _DIA.
0.270(6.8)
Dimensions in inches and (millimeters)
SYMBOLS 6A05S
6A1S 6A2S 6A4S 6A6S 6A8S 6A10S UNITS
Maximum Repetitive Peak Reverse Voltage
V_RRM
50
Maximum RMS Voltage
V_RMS
35
Maximum DC Blocking Voltage
V_DC
50
Maximum Average Forward Rectified Current
0.375”(9.5mm) lead length at TA= 60℃
I_(AV)
Peak Forward Surge Current
8.3mS single half sine wave superimposed on
rated load (JEDEC method)
I_FSM
Maximum Instantaneous Forward Voltage @ 6.0A
V_F
Maximum DC Reverse Current at Rated
DC Blocking Voltage
TA = 25℃
TA = 100℃
I_R
Maximum Full Load Reverse Current, full cycle average
0.375”(9.5mm)lead length at TL=105℃
I_R(AV)
Typical Junction Capacitance (Note 2)
C_J
100
200 400 600 800 1000 Volts
70
140 280 420 560 700 Volts
100
200 400 600 800 1000 Volts
6.0
Amps
250
Amps
0.95
Volts
10.0
µA
500
500
µA
100
pF
Typical Thermal Resistance (Note 1)
R_θJA
10
℃/W
Operating Junction Temperature Range
Storage Temperature Range
T_J
T_STG
（-55 to +150）
℃
（-55 to +150）
℃
Notes:
1. Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, PBC.mounted with 1.1”× 1.1”(30mm×
30mm)copper pads.
2. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC
E-mail: [e-mail] Web Site: www.cnmic.com