5KP5.0 Datasheet, PDF (1/4 Pages) MIC GROUP RECTIFIERS – PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
5KP5.0 THRU 5KP110CA
5KP5.0J THRU 5KP110CAJ
Stand-off Voltage
Peak Pulse Power
5.0 to 110 Volts
5000 Watts
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• Glass passivated junction or silastic guard junction
(open junction)
• 5000W peak pulse power
capability with a 10/1000μs Waveform,
repetition rate (duty cycle): 0.05%
• Excellent clamping capability
• Low incremental surge resistance
• Fast response time: typically less
than 1.0ps from 0 Volts to V(BR)
• Devices with V(BR)＞10V, ID are typically less than 1.0μA
• High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
MECHANICAL DATA
R-6
1.0(25.4)
MIN
.052(1.3)
.048(1.2)
DIA
.360(9.1)
.340(8.6)
1.0(25.4)
MIN
.360(9.1)
.344(8.6)
DIA
Dimensions in inches and (millimeters)
• Cass: molded plastic body over passivated junction
• Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
• Polarity: The Color bands denotes the cathode, which is postitive
with respect to the anode under normal TVS operation
• Mounting Position: any
• Weight: 0.07 ounces, 2.1 grams
DEVICES FOR BIDRECTIONAL APPLICATIONS
• For bidirectional use C or CA suffix for types 5KP5.0 thru 5KP110 (e.g. 5KP7.5CA,
5KP110CA).Electrical Characteristics apply in both directions.
• Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
• Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1)
Peak Pulse current with a 10/1000μs waveform (NOTE1)
Steady Stage Power Dissipation at TL=75℃
Lead lengths 0.375”(9.5mm)(Note2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method)(Note 3)
Maximum forward voltage at 100.0A (NOTE 3)
Operating Junction and Storage Temperature Range
PPPM Minimum5000 Watts
IPPM
See Table 1 Amps
PM(AV)
8.0
Watts
IFSM
VF
TJ, TSTG
400.0
3.5
50 to +150
Amps
Volts
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5.
3. Measured on 8.3ms single half sine-wave or equivalent wave, duty cycle=4 pulses per minute maximum
E-mail: [e-mail] Web Site: www.cnmic.com