MXH1100 Datasheet, PDF (1/1 Pages) MagnaChip Semiconductor. – Temperature and Humidity sensor IC

MXH1100
Temperature and Humidity sensor IC
The MXH1100 is a state of the art temperature and relative humidity sensor utilized proven
techniques for measuring humidity using polymer dielectric film along with CMOS mixed
signal integrated circuits. It provides fully calibrated digital output(I2C, PWM, PDM) and
analog output as well. In particular, its analog output allows for easy integration without the
need for additional calibration/component. The resolution can be changed by command
(8/12bit up to 12/14bit for RH/T). Every sensor is individually calibrated and tested and the
lot identification is printed on the sensor.
Key Feature
Function
Response Time
Package (mm)
Humidity Accuracy
VDD
System operating
VDD current(5V)
Output
MXH1100
Humidity / Temperature
Linear / Temp. compensation
~10sec
2.8x3.6 10-pin DFN
±3.0 %
4.75~5.25V
0.3mA
@Analog voltage mode
I2C / PWM / PDM / Analog Voltage
Selectable by SEL[1:0]
Block Diagram
For more information, please email at [e-mail]
MAGNACHIP COPYRIGHT