PDG-4E-250 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – 0 POWER DIVIDERS / COMBINERS

PDG-4E Series
0 POWER DIVIDERS / COMBINERS
10 to 2000 MHz / 4-Way / Uniform Phase & Ampli. Bal. / Broadband / Hi-Rel Hermetic Pkg / SMD
PRINCIPAL SPECIFICATIONS
Standard
Model
Number
Model for
Vapor Phase
& IR Insertion
PDG-4E-250 PDG-4E-255
PDG-4E-1300 PDG-4E-1305
Freq. Isolation, Insertion Amplitude Phase VSWR Input
Range,
dB, Loss, dB, Bal., dB, Balance, In/Out Power
MHz Min. Typ. Max. Typ. Max. Typ. Max. Typ. Max. Typ. Max.*
10 - 500 25
30 1.25 0.8 0.2 0.1 4° 2° 1.3:1 1.2:1 1 W
20 - 2000 18
50 - 1000 20
23 3.0 2.5 0.6 0.4 8° 4° 1.8:1 1.5:1 1 W
25 2.0 1.5 0.4 0.2 6° 4° 1.6:1 1.5:1 1W
*CW input power when used as divider with 1.2:1 VSWRout
General Notes:
1. The PDG-4E series of 4-way In-Phase Power Dividers/ Combiners
covers 10 to 2000 MHz using a binary lumped element design to
maximize frequency response. Such designs are suitable where high
performance and a low profile surface mount package is essential.
GENERAL SPECIFICATIONS
Coupling:
-- 6 dB nom.
Impedance:
50 Ω nom.
Internal Load Dissipation: 50 mW max.
Weight, nominal:
0.32 oz. (9 g)
Operating Temperature: -- 55° to +85°C
Package Outline
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked tabs are case ground.
Pin Number
3
5,6,7,8
All Others
Function
Input
Outputs
Case Ground
11Apr96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]