PDF-4A-100 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – 0 POWER DIVIDER / COMBINER

PDF-4A-100
0 POWER DIVIDER / COMBINER
1 to 200 MHz / 4-Way / High Output Isolation / Low Insertion Loss / Hi-Rel Hermetic Flatpack
Model
Number
PDF-4A-100
PRINCIPAL SPECIFICATIONS
Frequency Isolation,
Insertion
Range,
dB,
Loss, dB,
MHz Min. Typ. Max. Typ.
Amplitude
Balance, dB,
Max. Typ.
1 - 200 20 25 1.5 1.0
0.4 0.2
Phase
Balance,
Max. Typ.
4°
2°
VSWR
Max. Typ.
1.5:1 1.3:1
A-Package Outline
GENERAL SPECIFICATIONS
Coupling:
-- 6 dB nom.
Impedance:
50 Ω nom.
CW Input Power:
50 mW max.
(When used as divider with 1.2:1 VSWRout)
Internal Load Dissipation: 35 mW max.
Weight, nominal:
0.1 oz. (2.8 g)
Operating Temperature: -- 55° to + 85°C
General Notes:
1. The PDF-4A-100 4-way Power Di-
vider/Combiner covers a broad frequency
range of 1 to 200 MHz using a lumped element
design to reduce the size to an absolute mini-
mum. This unit is ideal for applications where
high performance and low profile are essen-
tial.
2. Higher performance, including better isola-
tion and lower insertion loss, is available with
the PDF-4E series of Four Way Power Di-
vider/Combiner. These units are supplied in a
larger package than the PDF-4A-100.
3. Other Merrimac Power Dividers/Combiners
are available for frequencies from a few kilo-
hertz to 20 GHz, with outputs from two to
sixteen and for powers up to several kilowatts.
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
16Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]