P-112 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – 0 POWER DIVIDERS / COMBINERS

P-112 & P-152
0 POWER DIVIDERS / COMBINERS
1 to 400 MHz / 3-Way / Uniform Phase & Amplitude Bal. / Low Insertion Loss / Broadband / TO-5
PRINCIPAL SPECIFICATIONS
Freq. Frequency Isolation, Insertion Phase Amplitude VSWR Internal
Model Range, Performance, dB, Loss, dB, Balance, Bal., dB, (In/Output) Load
Number MHz
MHz Min. Typ. Max. Typ. Max. Typ. Max. Typ. Max. Typ. Dissip.
P-112 1 - 200
1 - 100 25
100 - 200 25
30 1.2 0.7 3° 2° 0.3
30 1.2 0.7 5° 3° 0.5
0.2 1.3:1 1.2:1 35 mW
0.3 1.5:1 1.3:1
P-152 50 - 400
50 - 300 25
300 - 400 20
30 1.0 0.6 3° 2° 0.3
25 1.5 1.0 5° 3° 0.5
0.2 1.3:1 1.2:1 35 mW
0.3 1.5:1 1.3:1
Package Outline of P-112/P-152
GENERAL SPECIFICATIONS
Coupling:
-- 4.8 dB nom.
Impedance:
50 Ω nom.
CW Input Power:
1 Watt max.
(When used as divider with 1.2:1 VSWRout)
Weight, nominal:
0.1 oz (2.8 g).
Operating Temperature: -- 55° to +85°C
Typical P-152 Performance
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
General Notes:
1. The P-112/P-152 series 3-way Power Divider/Combiners cover a
broad frequency range from 1 to 400 MHz using a special lumped
element design to reduce the size to an absolute minimum.
2. These units are well suited to applications where high performance
is required in a compact package.
16Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]