IQP-27U-20B Datasheet, PDF (1/2 Pages) Merrimac Industries, Inc. – I&Q NETWORKS

IQP-27U Series
I&Q NETWORKS
20 to 200 MHz / In-Circuit Phase and Amplitude Adjustments / 10% Bandwidth / High Precision
U - Package Outline
PRINCIPAL SPECIFICATIONS
Model
Number
LO Freq,
fo, MHz
†_Bandwidth
RF Input
IQP-27U-***B 20 - 200
10% of fo
For complete Model Number replace *** with desired LO Frequency in MHz.
Pin No.
1
2
3
4
5
6
Function
Phase Adjust
LO Input
I Output
Amplitude Adjust
RF Input
Q Output
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Lead dimensions apply only at body.
4. All unmarked pins are case ground.
GENERAL SPECIFICATIONS
RF and LO Input Characteristics
Impedance:
50 Ω nom.
VSWR:
1.5:1 max.
RF Power Level:
0 dBm nom.
LO Power Level
+10 dBm nom.
I & Q Output Characteristics
Video Bandwidth:
DC to ^†50 MHz nom.
Output Impedance: 50 Ω nom.
Conversion Loss
(RF to I or Q):
10 dB typ,12 dB max.
IF Balance (I to Q) @ Vc=+5V
Phase:
Amplitude:
Bias Controls, @ fo:
90° ± 2°
0 ± 0.2 dB
0 to +10V
Phase Tuning Range: ± 10° nom.
Amplitude Range:
± 1 dB nom.
Temperature Stability: ± 0.2 dB, ±1° max.
Operating Temperature:-- 55° to +85°C
Weight, nominal:
0.55 oz (15.4 g)
†_{RF and Video Bandwidths are typically much greater than specified.}
AVAILABLE OPTIONS
Higher Level Mixers: Contact Factory
Higher Frequencies: Contact Factory
General Notes:
1. I & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed RF and LO signals.
2. The IQF-27L series features in-circuit, voltage controlled phase and amplitude balance adjustments that allow fine adjustments when the device
is in its normal operating environment. These features provides accuracy not previously attainable in a comparably small package. In addition, the
voltage controlled phase and amplitude balance inputs facilitate closed loop, servo operation using the adjustment inputs in the feedback loops.
3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional
specifications for military and space applications requiring the highest reliability.
13Feb96
ForfurtherinformationcontactM ERRIM AC /41FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX [phone]