IQG-20E-20B Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – I&Q NETWORKS

IQG-20E Series
I&Q NETWORKS
Units to 1 GHz / Low Loss / Close Tolerance in Both Phase and Amplitude / Hi-Rel Hermetic
Package
Performance over Video Bandwidth (LO at 500 MHz)
PRINCIPAL SPECIFICATIONS
Model LO Frequency, ^†Video BW,
Number
fo, MHz
MHz
IQG-20E-***B 20 - 160
50
IQG-20E-***B 160 - 1000
100
For Model Number replace *** with LO Center Frequency, fo in MHz.
General Notes:
1. I & Q networks are integrated networks that produce two quadrature phased,
equal amplitude signals when fed RF and LO signals.
2. The IQG-20E is specially tailored for high accuracy at a specified LO frequency.
It maintains the minimum specified performance across a band equal to 10% of
the LO frequency.
3. Merrimac I & Q networks comply with the relevant sections of MIL-M-28837 and
may be supplied screened for compliance with additional specifications for military
and space applications requiring the highest reliability.
GENERAL SPECIFICATIONS
RF/LO Input Characteristics (50 Ω nom.)
VSWR:
1.5:1 max.
RF Bandwidth:
10% of fo
Power Level:
0 dBm nom.
LO Power Level @ fo: +10 dBm nom.
Conversion Loss
(RF to I/Q):
10 dB typ,12 dB max.
IF Quadrature Balance (I to Q),@100 kHz IF
Phase, @ LO=fo:
±1° nom., ±2° max.
Phase, @ LO=fo±5%: ±3° nom., ±5° max.
Ampl., @ LO=fo:
0.2 dB max.
Ampl., @ LO=fo±5%: 0.5 dB max.
Weight, nominal:
0.32 oz (9 g)
Operating Temp:
-- 55° to +85°C
†_{RF and Video Bandwidths are typically much greater than specified.}
E - Size Surface Mount
NOTES:
1. Tolerance on 3 place decimals
±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked pins are case ground.
13Feb96
ForfurtherinformationcontactM ERRIM AC /41FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX [phone]