HJZ-B-100 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – 0°/180°POWER DIVIDER / COMBINER

HJZ-B-100
0°/180°POWER DIVIDER / COMBINER
1 to 200 MHz / Symmetrical Phase / High Isolation / Low Insertion Loss / CaseFree Package
Model
Number
HJZ-B-100
Frequency
Range,
MHz
1 - 200 MHz
B - Outline
PRINCIPAL SPECIFICATIONS
Performance
Bandwidth,
MHz
Isolation, Insertion Amplitude
E - H Ports, Loss, dB, Balance, dB,
dB, Min. Max.
Max.
2 - 100
30
0.5
0.2
1 - 200
20
0.8
0.4
Phase
Balance,
Max.
± 3°
± 5°
VSWR,
Max.
1.3:1
1.5:1
GENERAL SPECIFICATIONS
Impedance:
50 Ω nom.
Coupling:
-- 3 dB nom.
CW Input:
1 Watt max.
Weight, nominal:
0.007 oz (200 mg)
Operating Temperature: -- 55° to +85°C
Key to Pads and Signal State
Σ
∆
(Sum) (Delta)
Pad 2 Pad 3
Isol. In
In Isol.
Co-Linear
1
Pad 1
0° ref.
0° ref.
Co-Linear
2
Pad 4
-- 180°
0°
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
General Notes:
1. The HJZ-B series of 0°/180° hybrid junctions covers
1 to 200 MHz using lumped element technology to
achieve good isolation and balance over wide
bandwidths.
2. These units have been designed for size and
process compatibility with MMIC and similar devices.
In particular, the height of the component is limited to
0.130" so that it can be mounted with other miniature
components in a low profile hermetic housing.
3. The metallized alumina substrate may be attached
to the main ground plane using silver epoxy or solder
while signal leads may be wire bonded, epoxied or
soldered to the gold pads.
4. All units comply with MIL-P-23971 and can be
supplied screened to comply with specifications you
designate for high reliability applications.
24May96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]