DMT-2C-4000 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – DOUBLE BALANCED MIXERS

DM T-2C -4000
DOUBLEBALANCED M IXERS
2.5to6.5GHz/+7to+10dBm LO /Low Loss/HighPerformance/HermeticTO-8Package
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
Freq.,
MHz
IF
Freq.,
MHz
Operating
Range,
MHz
Conversion
Loss, dB,
Max. Typ.
Port Isolation, Typ. VSWR
L-R L-X R-X
Typ.
dB dB dB LO RF
DMT-2C-4000 2500 - 6500 DC - 2500 2500 - 3000
7.0 5.0
35 20 15 1.5:1
3000 - 4000
7.0 4.5
35 25 13 1.5:1
4000 - 6500
7.0 4.5
30 25 13 2.5:1
All specifications are as measured in a 50Ω system, at nominal LO Power, in a down converter application.
1.7:1
1.5:1
1.4:1
Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
GENERAL SPECIFICATIONS
Impedance:
50 Ω
LO Drive:
+7 dBm nom.
Third Order Input Intercept: +12 dBm typ.
Noise Figure:
±1 dB of
Conversion Loss
1 dB Compression Point: 0 dBm min.
(Referenced to Input)
1 dB Desensitization Point: – 2 dBm min.
(Referenced to Input)
Polarity Sense:
Positive
DC Offset Voltage:
5 mV typ.
Weight, nom:
0.1 oz (2.8 g)
Operating Temperature: – 55° to +85°C
General Notes:
1. The DMT-2C-4000 Double Balanced Mixer covers the frequency range of 2.5 to 6.5 GHz using a four diode ring modulator configuration
for high performance and minimum size. The TO-8 package provides high reliability at low cost.
2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions with frequencies
ranging from 20 kHz to 20 GHz and for applications from routine to very special.
3. Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional specifications for military
and space specifications requiring the highest reliability.
29Apr96
ForfurtherinformationcontactM ERRIM AC /41 FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX [phone]