DMM-6-1500 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – DOUBLE BALANCED MIXER

DM M -6-1500
DOUBLEBALANCED M IXER
10to3000M Hz/+10to+17dBm LO /SM A Connectors
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO LO *IF Operating Conversion Port Isolation, Min. 1 dB Input
Frequency, Drive, Freq., Range, Loss, dB, L-R L-X R-X Compr. Intercept
MHz Nom. MHz MHz Max. Typ. dB dB dB Point Point
DMM-6-1500
10 - 3000 +13 10 - 1000 10 - 500 9.0 8.5
dBm
500 - 1000 9.0 8.0
1000 - 3000 9.0 8.5
25 20 15
30 25 20
20 20 20
+7 dBm +19 dBm
(typ.) (typ.)
*IF Response extends to DC with increased conversion loss.
All specifications are as measured in a 50Ω system, at nominal LO power, in a downconverter application
Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.020(.51) except as noted.
2. Dimensions in inches over millimeters.
GENERAL SPECIFICATIONS
Impedance:
50 Ω nom.
Polarity Sense:
Negative
Noise Figure:
Within ±1 dB of
Conversion Loss
Useful LO Drive:
+10 to +17 dBm
Maximum Input Power: 600 mW @25°C
(derate linearly to 0 mW @125°C)
1 dB Desens. Level: +5 dBm typ.
DC Offset Voltage:
8 mV typ.
Weight, nominal:
1.5 oz (42 g)
Operating Temperature: – 55° to +85°C
General Notes:
1. The DMM-6-1500 Double Balanced Mixers covers the frequency range of 10 to 3000 MHz using two parallel ring
modulators to produce a medium level mixer with and extremely wide bandwidth.
2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions
with frequencies ranging from 20 kHz to 20 GHz and for applications from routine to very special.
3. Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional
specifications for military and space specifications requiring the highest reliability.
24May96
ForfurtherinformationcontactM ERRIM AC /41 FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX [phone]