DMM-2C-4000 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – DOUBLE BALANCED MIXER

DM M -2C-4000
DOUBLEBALANCED M IXER
2.5to6.5GHz/+7to+10dBm LO /Low ConversionLoss/SM A Connectors
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
IF
Operating
Frequency, Frequency, Range,
MHz
MHz
MHz
Conversion
Loss, dB,
Max. Typ.
Port Isolation, Typ. VSWR
L-R L-X R-X
Typ.
dB dB dB LO RF
DMM-2C-4000 2500 - 6500 DC - 2500 2500 - 3000 7.0 5.0
35 20 15
3000 - 4000 7.0 4.5
35 25 13
4000 - 6500 7.0 4.5
30 25 13
All specifications are as measured in a 50Ω system, at nominal LO Power, in a down converter application.
1.5:1 1.7:1
1.5:1 1.5:1
2.5:1 1.4:1
Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.020(.51)
except as noted.
2. Dimensions in inches over millimeters.
GENERAL SPECIFICATIONS
Impedance:
50 Ω
LO Drive:
+7 dBm nom.
Input Intercept Point: +12 dBm typ.
Noise Figure:
±1 dB of
Conversion Loss
1 dB Compression Point:0 dBm min.
(Referenced to Input)
1 dB Desens. Point: – 2 dBm min.
(Referenced to Input)
Polarity Sense:
Positive
DC Offset Voltage:
5 mV typ.
Weight, nom:
1 oz (28 g)
Operating Temperature: – 55° to +85°C
General Notes:
1. The DMM-2C-4000 Double Balanced Mixer covers the frequency range of 2.5 to 6.5 GHz using a distributed design to provide low
loss and broad bandwidth in a small package.
2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions with frequencies ranging
from 20 kHz to 20 GHz and for applications from routine to very special.
3. Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional specifications for military
and space specifications requiring the highest reliability
29Apr96
ForfurtherinformationcontactM ERRIM AC /41 FairfieldPl.,W estCaldw ell,NJ,07006 /973-575-1300 /FAX [phone]