DMG-10B-300 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – DOUBLE BALANCED MIXER

DMG-10B-300
DOUBLE BALANCED MIXER
10 to 600 MHz / + 20 to + 27 dBm LO / + 30 dBm Third Order Intercept / Class III Mixer / SMD
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
Freq.,
MHz
Operating
Range,
MHz
IF
Frequency,
MHz
Conversion
Loss, dB,
Max. Typ.
Port Isolation, Min.
L-R L-X R-X
dB dB dB
DMG-10B-300 10 - 600
10 - 300
10 - 200
7.5 6.0
35 25 25
10 - 600
1 - 500
9.0 7.0
25 20 20
All specifications are as measured in a 50Ω system, at nominal LO power, in a down converter application.
Package Outline
Polarity
Sense
Pos.
Tab Func.
1 R (RF)
2 X (IF)
3 Ground
4 L (LO)
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked pins are case ground.
General Notes:
1. The DMG-10B-300 Double Balanced Mixer covers the
frequency range of 10 to 600 MHz using a Class III ring
modulator with integral series RC networks. This yields a mixer
with high third order intercept points over a wide range of LO
power.
2. Merrimac offers a broad selection Double Balanced Mixers
ideal for a variety of signal processing functions with frequencies
ranging from 20 kHz to 20 GHz and for applications from routine
to very special.
3. Merrimac mixers comply with MIL-M-28837 and may be
supplied screened for compliance with additional specifications
for military and space applications requiring the highest
reliability.
29Feb96
GENERAL SPECIFICATIONS
LO Drive:
+25 dBm nom.
Impedance:
Noise Figure:
50 Ω nom.
Within ±1 dB of
Conversion Loss
1 dB Comp. Point:
+20 dBm input typ.
Input Intercept Point: +30 dBm typ.
IF Rolloff below 1 MHz: 1 dB nom. @ DC
Maximum Input Power: 900 mW @ 25°C
(derate linearly to 0 mW @ 125°C)
DC Offset Voltage:
8 mV typ.
Weight:
0.1 oz (2.8 g)
Operating Temperature: -- 55° to +85°C
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]