English
Language : 

DMF-8A-250 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – DOUBLE BALANCED MIXERS
DMF-8A Series
DOUBLE BALANCED MIXERS
500 kHzto2 GHz / +17 to+23 dBmLO/ +25 dBmThirdOrder Intercept / Flatpack
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
IF
Frequency, Frequency,
MHz
MHz
Operating
Range,
MHz
Conversion
Loss, dB,
Max. Typ.
Port Isolation, Min.
L-R L-X R-X Polarity
dB dB dB Sense
DMF-8A-250 0.5 - 500 DC - 500
0.5 - 1
1 - 300
300 - 500
8.0 7.0
7.0 6.0
8.0 7.0
40 30 23
40 30 23
35 20 20
DMF-8A-500 10 - 1000 DC - 1000
10 - 50
50 - 500
500 -1000
7.5 6.5
7.5 6.5
8.5 7.5
35 30 25
30 25 20
25 15 15
DMF-8A-700 10 - 1500 DC - 1000
10 - 600
600 -1000
1000 -1500
8.0 7.0
8.0 7.0
9.5 8.5
30 20 15
20 12 15
20 12
8
DMF-8A-1700 500 - 2000 DC - 1000 500 - 2000
8.0 6.0
25 25 15
All specifications are as measured in a 50Ω system, at nominal LO power, in a down converter application
Pos.
Pos.
Neg.
Neg.
Package Outline
NOTES:
± 1. Tolerance on 3 place decimals .010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Dimensions marked with * apply only at body.
4. All unmarked pins are case ground.
GENERAL SPECIFICATIONS
LO Drive:
Impedance:
Noise Figure:
+20 dBm nom.
50 Ω nom.
Within ±1 dB of
Conversion Loss
1 dB Comp. Point:
+13 dBm input typ.
Input Intercept Point: +25 dBm typ.
Maximum Input Power: 600 mW @ 25°C
(derate linearly to 0 mW @ 125°C)
DC Offset Voltage:
5 mV typ.
Weight:
0.1 oz (2.8 g)
Operating Temperature: – 55° to +85°C
General Notes:
1. The DMF-8A series of Double Balanced Mixers covers the frequency range of 0.5 to 2000 MHz using an eight diode ring modulator to produce
a high level mixer with high third order intercept points.
2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions with frequencies ranging from
20 kHz to 20 GHz and for applications from the routine to the very special.
3. Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space
applications requiring the highest reliability.
29Apr96
For further informationcontact MERRIMAC/ 41 FairfieldPl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX973 575-0531