BPG-2A-500 Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – BIPHASE MODULATOR

BPG-2A-500
BIPHASE MODULATOR
100 to750 MHz/ ECL& TTLCompatible/ Fast Switching/ SMDPackage
Model
Number
BPG-2A-500
Frequency
Range,
MHz
100 – 750
A-Size Surface Mount Outline
PRINCIPAL SPECIFICATIONS
Insertion
Loss, dB,
Max. Typ.
Amplitude
Balance, dB,
Max. Typ.
Phase
Balance
Max. Typ.
54
0.5 0.2
±5° ±2°
Carrier
Suppression
Typ.
– 30 dBc
NOTES:
± 1. Tolerance on 3 place decimals .010 (.25) except as noted.
2. Dimensions in inches over millimeters.
3. Max is largest dimension allowed.
4. All unmarked tabs are case ground.
5. Untrimmed tab length 0.25 (6.35) nominal.
General Notes:
1. The BPG-2A-500 Biphase Modulator covers the frequency range of 100
to 750 MHz and is ideal for applications where space available for mixer
installation is very limited. Other units operate up to 3.6 GHz and provide
proportionately fast rise times.
2. Customized versions are available for special frequency bands matched
to your special applications. Most units are available in a variety of
alternative packages such as the TO-8, flatpack or connectorized
packages. TTL or ECL drivers can be provided in the larger packages.
3. Merrimac Biphase Modulators cover a variety of frequency bands while
providing wide bandwidths suitable for most applications.
4. All units comply with MIL-M-28837 and may be supplied screened for
compliance with additional specifications for military and space applications
requiring the highest reliability.
03May96
GENERAL SPECIFICATIONS
Impedance:
50 Ω nom.
RF Input Level:
– 3 dBm max.
VSWR:
2.0:1 max.
Switching Speed:
3 nS typ.
Data Levels: Logic 1: +15 mA
Logic 0: – 15 mA
Weight, nominal:
0.02 oz (0.5 g)
Operating Temperature: – 55° to +85°C
For further informationcontact MERRIMAC/ 41 FairfieldPl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX[phone]