113A Datasheet, PDF (1/1 Pages) Merrimac Industries, Inc. – POWER DIVIDERS / COMBINERS

113A & B
0 POWER DIVIDERS / COMBINERS
0.5 to 500 MHz / 2-Way / Uniform Phase & Ampli. Bal. / Low Insertion Loss / Broadband / PC Mount
PRINCIPAL SPECIFICATIONS
Freq. Frequency Isolation, Insertion Phase
Model Range, Perform.,
dB,
Loss, dB, Balance
Number MHz
MHz Min. Typ. Max. Typ. Max. Typ.
Amplitude
Bal., dB,
Max. Typ.
113A
113B
10 - 500
0.5 - 200
10 - 200
200 - 500
0.5 - 200
1 - 100
20 25
20 25
25 30
25 30
0.7 0.3
1.0 0.7
0.7 0.4
0.5 0.25
2° 1°
2° 1°
2° 1°
2° 1°
0.2 0.1
0.2 0.1
0.2 0.1
0.2 0.1
VSWR
(In/Output)
Max. Typ.
1.5:1 1.2:1
1.5:1 1.2:1
1.5:1 1.2:1
1.5:1 1.2:1
Internal
Load Power
Dissipation
125 mW
250 mW
Package Outline
NOTES:
1. Tolerance on 3 place decimals
±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. Nominal Weight: 0.1 oz (3 g).
GENERAL SPECIFICATIONS
Coupling:
-- 3 dB nom.
Impedance:
50 Ω nom.
CW Input Power:
1 W max.
(When used as divider with 1.2:1 VSWRout)
Operating Temperature: -- 55° to +85°C
Typical Performance
General Notes:
1. The 113A and 113B series of power dividers/combiners covers a broad frequency range of 500 kHz to 500 MHz.
2. The square header and relay header packages used in this series are suitable for applications emphasizing high performance and limited
PC board space.
16Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX [phone]