HQ Datasheet, PDF (7/8 Pages) Broadband TelCom Power, Inc. – 40-50A High Efficiency Quarter Bricks

Multilayer Ceramic Capacitors
HQ Series
(High Q)
Storage and handling conditions
(1) To store products at 5 to 40C ambient temperature and 20 to 70% related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solder ability in case of shelf life extension is
needed.
Cautions:
a. Don’t store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode,
which easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Don’t expose products to excessive shock, vibration, direct sunlight and so on.
Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against
lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N₂
within oven are recommended.
Fig. 12 Recommended IR reflow soldering profile for SMT process with SnAgCu series solder paste.
Rev. 7a