TMPE-FMPE Datasheet, PDF (1/1 Pages) MERITEK ELECTRONICS CORPORATION – Non-inductive construction

Metallized Polyester
Film Capacitors
TMPE & FMPE Series
(Axial Lead)
MERITEK
FEATURES
• Non-inductive construction
• Good solderability
• Self-healing properties
• High stability of capacitance
SPECIFICATIONS
1. Operating temperature:
2. Capacitance range:
3. Capacitance tolerance:
4. Rated voltage:
5. Dissipation factor:
6. Insulation resistance:
-40^oC to +85^oC
0.01μF to 12μF
±5%(J), ±10%(K), ±20%(M)
100VDC, 250VDC, 400VDC, 630VDC
1.0% max. at 1KHz, 25^oC
>30000MΩ (C ≤ 0.33μF)
>10000MΩ • μF (C > 0.33 μF)
PART NUMBERING SYSTEM
Meritek Series
* TMPE / FMPE
TMPE
223 J 2A
Capacitance
CODE
101
102
103
104
105
106
( pF )
100 1,000 10,000 100,000
( nF )
( μF )
---
1
10
---
0.001
0.01
100
1000
0.1
1
10
Tolerance
CODE
J
K
M
Tolerance (%)
±5
± 10 ± 20
Rated Voltage
CODE 2A
100V
2E
250V
2G
2J
400V 630V
Tape & Reel / Tape & Ammo available for diameter 10mm or smaller
Please contact factory for part numbers
TMPE & FMPE are constructed with
metallized polyester film dielectric, tinned copper
leads, polyester film tape outer wrapping, and
non-inductive epoxy resin end seals. They are ideal
for coupling and decoupling, bypassing, filtering,
and other applications. TMPE and FMPE are
frequently used in data processing equipment,
automatic control systems, devices for
telecommunication and industrial instruments.
MIN
35mm
MAX
L
MIN
35mm
MAX
OD
d
d 0.05
35mm
W2
35mm
T
MAX
Dimensions in millimeters (mm)
Rated
Voltage
DIM.
CAP(μF)
0.010
0.015
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10.0
12.0
100VDC
ØD
L
6.0 15.0
6.0 15.0
6.0 15.0
6.5 15.0
7.0 15.0
7.0 15.0
7.0 15.0
7.0 15.0
7.0 15.0
8.0 15.0
7.5 21.0
8.5 21.0
10.0 21.0
10.0 26.0
11.5 26.0
13.0 26.0
14.5 33.0
18.0 33.0
20.0 33.0
22.0 33.0
TMPE
250VDC
400VDC
ØD
L
ØD
L
6.0 15.0 6.0 15.0
6.0 15.0 6.0 15.0
6.0 15.0 6.0 15.0
6.5 15.0 6.5 15.0
7.0 15.0 7.0 15.0
7.0 15.0 7.0 21.0
7.0 15.0 8.0 21.0
7.0 15.0 9.0 21.0
7.0 21.0 9.5 26.0
8.0 21.0 11.0 26.0
9.0 21.0 13.0 26.0
9.0 26.0 13.5 33.0
10.5 26.0 16.0 33.0
13.0 26.0 19.0 33.0
14.0 33.0 20.0 37.0
16.5 33.0 25.0 37.0
18.0 37.0
20.5 37.0
22.0 47.0
24.0 47.0
630VDC
ØD
L
6.0 15.0
6.5 15.0
7.0 15.0
9.0 15.0
7.5 21.0
8.5 21.0
11.0 21.0
10.5 26.0
14.0 26.0
12.0 33.0
14.0 33.0
16.5 33.0
20.0 37.0
25.0 37.0
23.0 47.0
Custom sizes available upon request
Custom values and tolerances available upon request
Specifications are subject to change without notice.
100VDC
W
H
T
15.0 9.0
5.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 11.0 6.0
21.0 10.0 6.0
21.0 11.0 6.0
21.0 12.5 7.0
26.0 12.0 7.0
26.0 16.0 9.0
26.0 18.5 11.0
33.0 18.5 9.0
33.0 23.0 13.0
33.0 26.5 16.0
250VDC
FMPE
400VDC
W
H
T
W
H
T
15.0 9.0
5.0 15.0 9.0
5.0
15.0 10.0 6.0 15.0 10.0 6.0
15.0 10.0
6.0
15.0 9.0
5.0
15.0 10.0 6.0 15.0 10.0 6.0
15.0 10.0 6.0 15.0 10.0 6.0
15.0 10.0 6.0 15.0 10.0 6.5
15.0 10.0 6.0 21.0 11.0 6.5
15.0 10.0 6.0 21.0 11.5 6.5
21.0 8.5
5.0 21.0 13.5 7.5
21.0 10.0 5.0 26.0 14.5 8.0
21.0 11.0 7.0 26.0 15.5 9.0
26.0 11.0 7.0 33.0 15.0 7.5
26.0 14.0 8.0 33.0 18.5 10.0
26.0 16.0 9.0 33.0 21.0 12.5
33.0 18.0 9.5 38.0 23.0 14.0
33.0 20.0 11.0 38.0 26.0 17.0
38.0 25.0 16.0 38.0 30.0 21.0
38.0 27.0 19.0
47.0 30.0 22.0
630VDC
W
H
T
15.0 9.0
5.0
15.0 10.0 6.0
15.0 10.0 6.0
15.0 11.0 7.0
21.0 10.0 6.0
21.0 11.0 7.0
21.0 13.0 8.0
21.0 15.0 10.0
26.0 14.5 8.5
26.0 17.0 10.0
33.0 17.5 9.0
33.0 19.0 11.0
37.0 22.0 13.0
37.0 27.0 17.0
47.0 28.0 19.0
rev.6a