SAC Datasheet, PDF (1/3 Pages) EIC discrete Semiconductors – LOW CAPACITANCE TRANSIENT VOLTAGE VBR : 5.0 - 50 Volts SUPPRESSOR

Transient 9ROWDJH6XSSUHVVRUV
SAC Series
MERITEK
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-O.
Glass passivated junction.
500W peak pulse power capability with a 10/1000µs waveform,
repetition rate (duty cycle): 0.01%.
Excellent clamping capability.
Low incremental surge resistance.
Fast response time: typically less than 5.0ns from 0 volt to VBR min.
Ideal for data line applications.
High temperature soldering guaranteed: 265℃/10 seconds/.375”,
(9.5mm) lead length, 5lbs., (2.3kg) tension.
M^MECHANICAL DATA
Case: JEDEC DO-15 molded plastic over a passivated junction.
Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode.
Mounting Position: Any.
Weight: 0.015 ounce, 0.4 grams.
DDOOA-204AC/DO-15
MMAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 10/1000μs waveform. (Note 1，Fig. 1)
Peak Pulse Current on 10/1000μs waveform. (Note 1，Fig. 3)
Steady State Power Dissipation at T_L =75℃，Lead length .375” (9.5mm).
( Fig. 5)
Operating junction and Storage Temperature Range.
Note: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25℃ per Fig. 2.
SYMBOL
P_PPM
I_PPM
P_M(AV)
T_J , T_STG
VALUE
Minimum 500
See Table
3.0
-55 to +175
UNIT
Watts
Amps
Watts
℃
All specifications are subject to change without notice.
1
Rev 7