RWSF Datasheet, PDF (1/1 Pages) MERITEK ELECTRONICS CORPORATION – Between Terminals and Case

Segmented Film Capacitors
RWSF Series
MERITEK
PART NUMBERING RWSF
206 - 275 W
Meritek Series
*RWSF
Capacitance
CODE 101 102 103 104 105 106
( pF ) 100PF F
PF 0PF
( nF ) ---
1
10 100
F
( μF ) --- 0.001Uf 0.01 0.1
1
10
Dash
Rated Voltage
CODE 275
275V
CODE
W
Lead Wire
(μF)
( % ) ( VAC )
Capacitance Tolerance Voltage
20
±5
275
30
±5
275
Test Voltage
( VDC )
T-T T-C
700 2000
700 2000
Outline Dimensions/mm
D
L LL Mold
35.5 61 100 1-64,FU
45.5 77 100 1-57,FU
40
±5
275 700 2000 45.5 77 100 1-57,FU
SPECIFICATIONS:
1. UL FILE NO: E311150
2. OPERATING TEMPERATURE: -25 ℃ ~ + 85 ℃.
3. CAPACITANCE RANGE: 20.0, 30.0, 40.0 µF.
4. CAPACITANCE TOLERANCE: J = ± 5%
5. RATED WORKING VOLTAGE RANGE: 275 VAC 50/60 Hz.
6. WITHSTAND VOLTAGE TEST:
( A ): Dielectric strength test
( TV ): rated voltage x 175 % x 1.414 for VDC 1-5 Sec,
( B ): Between Terminals and Case
( TC ): rated voltage x 2 + 1000V ( minimum 2000 V ) for one minute at 25 ℃.
7. DISSIPATION FACTOR (DF): 0.5 % MAX. When measured at 1KHZ, 25 ℃.
8. INSULATION RESISTANCE ( IR ):
( A ) Between Terminals: Above 5000 ΩF, at 100VDC in 25 ℃.
( B ) Between Terminals and Case: Above 10000MΩ, at 500VDC in 25 ℃.
9. PERMISSIBLE OVERLOADS：
( A ) Voltage: At an r.m.s voltage between terminals not exceeding 110﹪the rated voltage.
( B ) Current: At an r.m.s current not exceeding 130﹪the current which occurs at rated
sinusoidal voltage and rated frequency excluding transients. Taking into account the
tolerance, the maximum permissible current can be up to 130﹪ the rated current
increased in proportion to the actual capacitance value compared with the rated
capacitance value.
10. LIFE TEST (Continued): Rated voltage X 135%, 1000hours, in the + 85 ℃ chamber.
ΔC/C in ± 5 %. DF≤0.5% .
11. Protected –P2 10,000 A. F. C. (Ampere Fault Current)
12. Film: Segmented Metallized Film.
Rev.7