PECS Datasheet, PDF (1/2 Pages) MERITEK ELECTRONICS CORPORATION – Conductive Polymer Aluminum Solid Capacitor (SMT)

Conductive Polymer Aluminum
PECS Series
Solid Capacitor (SMT)
RoHS
FEATURES
 Low ESR, surface mounting, reduced height, wide temperature range.
 Suitable for DC-DC converters, voltage regulators and decoupling
applications.
 Rated voltage: 2.0Vdc ~6.3Vdc
 Endurance: 1000 hours at 105ºC
 RoHS compliant
MERITEK
SPECIFICATIONS
Item
Category Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Surge Voltage
Dissipation Factor ( tan  )
Endurance
Damp Heat, Steady State
Damp Heat, Steady State,
Applied Voltage
Surge Voltage
Characteristic
-55ºC ~ +105C
2.0VDC ~ 6.3VDC
M=±20%, Y=+10%~-35%
at 120Hz, 20ºC
I  0.06CV ( 2.0VDC ~ 4.0VDC )
I  0.04CV ( 6.3VDC )
at 20ºC after 2 minutes
I : Leakage Current (A)
C : Rated Capacitance(F)
V : Rated Voltage (V)
Rated voltage x 1.25V
at -55ºC ~ +105C
Case height: S type, 0.06 (max)
H type, 0.1 (max)
at 120Hz, 20ºC
Appearance: No significant damage
Capacitance change: ±10% of the initial value
DF(tanδ): within initial limit
Leakage current: within initial limit
at +105C rated voltage applied,
1000hours
Appearance: No significant damage
Capacitance change: +70%, -20% of the initial value
DF(tanδ): ≤200% of the initial limit
Leakage current: within initial limit
at +60C 90%~ 95% R.H., 500hours
Appearance: No significant damage
Capacitance change: +70%, -20% of the initial value
DF(tanδ): ≤200% of the initial limit
Leakage current: within initial limit
at +60C 90%~ 95% R.H.
rated voltage, 500hours
Appearance: No significant damage
Capacitance change: ±10% of the initial value
DF(tanδ): within initial limit
Leakage current: within initial limit
The capacitors shall be subjected to 1,000
cycles each consisting of charge with the
surge voltages, 125% rated voltage, at
105ºC for 30 seconds through a protective
resistor (R=1kΩ) and discharge for 5
minutes 30seconds
DIMENSIONS
Case Size
BL
BW
DIM EW
BH
EL
U
7.3±0.3
4.3±0.3
2.4±0.2
4.0±0.2
1.3±0.2
All Dimensions in mms
H
7.3±0.3
4.3±0.3
2.4±0.2
2.8±0.2
1.3±0.2
S
7.3±0.3
4.3±0.3
2.4±0.2
1.9±0.2
1.3±0.2
PAD LAYOUT(mm)
2.8
2.4
3.8
2.4
Rev. 7