PECH Datasheet, PDF (1/2 Pages) MERITEK ELECTRONICS CORPORATION – Conductive Polymer Aluminum Solid Capacitors (SMT)

Conductive Polymer Aluminum
Solid Capacitors (SMT)
PECH Series
RoHS
FEATURES
x Low ESR, surface mounting, reduced height, wide temperature range.
x Suitable for DC-DC converters, voltage regulators and decoupling
applications.
x Rated voltage: 2~2.5Vdc
x Endurance: 1000 hours at 105ºC
x RoHS compliant
MERITEK
SPECIFICATIONS
Item
Category Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Surge Voltage
Dissipation Factor ( tan G )
Endurance
Damp Heat, Steady State
Damp Heat, Steady State,
Applied Voltage
Surge Voltage
DIMENSIONS
Dim
Value
BL
7.3±0.3
BW
4.3±0.3
EW
2.4±0.2
BH
1.9±0.3
EL
1.3±0.2
All Dimensions in mms
Characteristic
-55ºC ~ +105qC
M=±20%, Y=+10%~-35%
2.0VDC ~ 2.5VDC
at 120Hz, 20ºC
I d 0.01CV (2.0VDC ~ 2.5VDC)
Ä¡
at 20ºC after 2 minutes
I : Leakage Current (PA)
C : Rated Capacitance(PF)
V : Rated Voltage (V)
Rated voltage x 1.25V
at -55ºC ~ +105qC
0.06 (max)
at 120Hz, 20ºC
Appearance: No significant damage
Capacitance change: ±10% of the initial value
DF(tanδ): within initial limit
Leakage current: within initial limit
at +105qC rated voltage applied,
1000hours
Appearance: No significant damage
Capacitance change: +70%, -20% of the initial value
DF(tanδ): ≤200% of the initial limit
Leakage current: within initial limit
at +60qC 90%~ 95% R.H., 500hours
Appearance: No significant damage
Capacitance change: +70%, -20% of the initial value
DF(tanδ): ≤200% of the initial limit
Leakage current: within initial limit
at +60qC 90%~ 95% R.H.
rated voltage, 500hours
Appearance: No significant damage
Capacitance change: ±10% of the initial value
DF(tanδ): within initial limit
Leakage current: within initial limit
The capacitors shall be subjected to 1,000
cycles each consisting of charge with the
surge voltages, 125% rated voltage, at
105ºC for 30 seconds through a protective
resistor (R=1kΩ) and discharge for 5
minutes 30seconds
PAD LAYOUT (mm)
2.8
2.4
3.8
2.4
Rev. 7