NS50V220MTA16X25 Datasheet, PDF (1/2 Pages) MERITEK ELECTRONICS CORPORATION – Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors
NS Series
(No Sparks with DC Overvoltage) _MERITEK
FEATURES
 No sparks with specified DC overvoltage applied.
 Withstanding 2000 hours application of rate ripple current at 105°C.
SPECIFICATIONS
Item
Operating Temp Range
Rated Working Voltage
Capacitance Tolerance
(120Hz 20C)
Leakage Current
I  0.06CV + 10 (A)
(20C)
＊After 2 minutes
Characteristic
- 25 ~ +105C
200 ~ 400VDC
 20%(M)
I : Leakage Current (A)
C : Rated Capacitance(F)
V : Working Voltage (V)
Surge Voltage
W.V.
200
400
(20C)
S.V.
250
450
Dissipation Factor ( tan  )
W.V.
200
400
(120Hz 20C)
tan 
0.15
0.24
Low Temperature Stability Impedance ratio at 120Hz
Rated Voltage (V)
200
400
-25C / +20C
4
6
Load Life
After 2000 hours application of W.V. and +105C ripple current value , the capacitor shall meet
the following limits. ( DC + ripple peak voltage  rated working voltage )
Capacitance Change  20% of initial.
Dissipation Factor  200% of initial specified value
Leakage Current
 initial specified value
Shelf Life
At +105C no voltage application after 1000 hours the capacitor shall meet the limits for load life
characteristics. ( with voltage treatment )
PART NUMBER SYSTEM
DIMENSIONS (mm)
NS 50V 220 M TA 16x25
Meritek Series
Rated Voltage
Rated Capacitance
Express in micro farad(uF), First two digits are
significant figures, Third digit denotes number of
zeros. ‘R’ denotes decimal point for values less
than 10uF
Tolerance
M - 20%
Package
Code
TA
Tape & Ammo
TR
Tape & Reel
Blank
Case size – (D) Diameter x (L) Length in mm (Optional)
D
16
18
F
7.5
7.5
d
0.8
0.8
a
1.5
1.5
Rev. 7