DMPP Datasheet, PDF (1/1 Pages) MERITEK ELECTRONICS CORPORATION – Metallized Polypropylene Film Capacitors

Metallized Polypropylene
Film Capacitors
DMPP Series
(Radial Dipped)
MERITEK
FEATURES
• Low dissipation factor and high insulation resistance
• High stability of capacitance and DF versus temperature and
frequency
• Non-inductive construction
• Self-healing properties
• Flame retardant epoxy resin coating
SPECIFICATIONS
1. Operating temperature: -55^oC to +105^oC
2. Capacitance range:
0.01μF to 3.3μF
3. Capacitance tolerance: ±5%(J), ±10%(K), ±20%(M)
4. Rated voltage:
5. Dissipation factor:
100VDC, 250VDC, 400VDC, 630VDC
0.1% max. at 1KHz, 25^oC
6. Insulation resistance: >30000MΩ (C ≤ 0.33μF)
>10000MΩ • μF (C > 0.33μF)
*Voltage derated at operating temperature >85^oC
PART NUMBERING SYSTEM
Meritek Series
DMPP 103 J 2A
Capacitance
CODE
103
104
105
106
( pF )
( nF )
10,000
10
100,000
100
1000
( μF )
0.01
0.1
1
10
Tolerance
CODE
J
K
M
Tolerance (%)
±5
± 10 ± 20
Rated Voltage
CODE
1H
50V
2A
100V
2E
250V
2G
2J
400V 630V
Tape & Reel/Tape & Ammo available for lead space < 10 mm
Please contact factory for part number.
DMPP are constructed with metallized
polypropylene film dielectric, tinned copper leads,
and an epoxy resin coating. They are suitable for
blocking, bypassing, coupling and decoupling,
filtering, timing, tuning, and temperature
compensation. DMPP are ideal for use in
telecommunication equipment, data processing
equipment, industrial instruments, automatic
control systems, and other devices.
Dimensions in millimeters (mm)
Rated
Voltage
DIM.
W
CAP(μ F)
50VDC/100VDC
H
T
P± 1 dØ
W
250VDC
H
T
P± 1 dØ
W
400VDC
H
T
P± 1 dØ
W
630VDC
H
T
P± 1 dØ
0.01
14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6
0.015
0.022
0.033
14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 13.0 7.0 10.0 0.6
14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 20.0 13.0 7.0 15.0 0.6
14.0 12.0 8.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6
0.047
0.068
0.1
14.0 11.0 7.0 10.0 0.6 14.0 12.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6 20.0 14.5 9.0 15.0 0.6
14.0 11.0 7.0 10.0 0.6 14.0 11.0 7.0 10.0 0.6 20.0 13.0 8.0 15.0 0.6 26.0 14.5 9.0 21.0 0.8
14.0 10.0 6.0 10.0 0.6 14.0 11.0 8.0 10.0 0.6 20.0 13.0 8.0 15.0 0.8 26.0 16.0 10.0 21.0 0.8
0.15
18.0 12.0 7.0 15.0 0.6 20.0 12.5 8.0 15.0 0.8 26.0 14.5 8.0 22.5 0.8 26.0 18.0 11.5 21.0 0.8
0.22
18.0 12.0 7.0 15.0 0.8 20.0 13.0 9.0 15.0 0.8 26.0 15.0 10.0 22.5 0.8 32.0 20.0 11.5 27.5 0.8
0.33
18.0 13.0 8.0 15.0 0.8 20.0 15.0 10.0 15.0 0.8 26.0 19.0 11.0 22.5 0.8 32.0 22.0 13.0 27.5 0.8
0.47
18.0 15.0 10.0 15.0 0.8 26.0 16.0 10.0 20.0 0.8 32.0 18.0 11.0 27.5 0.8 32.0 24.0 15.0 27.5 0.8
0.56
18.0 17.0 12.0 15.0 0.8 26.0 17.0 10.5 20.0 0.8 32.0 20.0 11.5 27.5 0.8 36.0 25.5 17.5 31.0 0.8
0.68
24.0 16.0 9.5 20.0 0.8 26.0 19.0 11.0 20.0 0.8 32.0 21.5 12.0 27.5 0.8 36.0 26.0 18.0 31.0 0.8
1.0
24.0 17.5 11.0 20.0 0.8 32.0 20.0 11.5 27.5 0.8 32.0 25.0 16.0 27.5 0.8
1.5
32.0 18.0 12.0 27.5 0.8 32.0 22.5 13.5 27.5 0.8
2.2
32.0 20.0 12.0 27.5 0.8 32.0 24.0 15.0 27.5 0.8
3.3
32.0 24.0 16.0 27.5 0.8 36.0 27.0 17.0 31.0 0.8
Custom sizes and lead spacing available upon request
Custom values and tolerances available upon request
Specifications are subject to change without notice.
rev.6a