5-0SMDJ Datasheet, PDF (1/4 Pages) MERITEK ELECTRONICS CORPORATION – For surface mounted applications in order to optimize board space

Transient Voltage Suppressors
60'- Series
MERITEK
FEATURES
For surface mounted applications in order to optimize board space.
Low profile package.
Built-in strain relief.
Glass passivated junction.
Low inductance.
Excellent clamping capability.
Repetition Rate (duty cycle): 0.01%.
Fast response time: typically less than 1.0ps from 0 volt to BV for unidirectional types.
Typical IR less than 1µA.
High Temperature soldering: 260°C/10 seconds at terminals.
M_MECHANICAL DATA
Case: JEDEC DO-214AB. Molded plastic over glass passivated junction.
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode except Bidirectional.
Standard Packaging: 16mm tape (EIA STD RS-481).
Weight: 0.007 ounce, 0.21 grams.
SMC/DO-214AB
M_MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
UNIT
Peak Pulse Power Dissipation on 10/1000 s waveform.
(Note 1, Note 2, Fig. 1)
P_PPM
Minimum 5,000
Watts
Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3)
Steady State Power Dissipation at T_L =75ƒ& , Lead lengths .375”
(9.5mm). (Note 2, Fig. 5)
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load. (JEDEC Method) (Note 3, Fig. 6)
I_PPM
P_M(AV)
I_FSM
See Table
6.5
300
Amps
Watts
Amps
Operating junction and Storage Temperature Range.
T_J , T_STG
-65 to +150
ƒ&
NNgo.tes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25ƒ& Ser Fig. 2.
2.
.2.MMounntteeddoonn8.80.m0mmx 8x.08m.0mmCmopCpeorpPpaedrsPtoadesactho teramcihnatle. rminal.
33..e8s.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. maximum.
All specifications are subject to change without notice.
1
Rev 7