15KPA Datasheet, PDF (1/4 Pages) Protek Devices – POWER TVS COMPONENT

Transient 9ROWDJH6XSSUHVVRUV
15KPA Series
MERITEK
6
FEATURES
— Plastic package.
— Glass passivated junction.
— 15,000W Peak Pulse Power capability on 10/1000μs waveform.
— Excellent clamping capability.
— Repetition rate (duty cycle): 0.05%.
— Low incremental surge resistance.
— Fast response time: typically less than 1.0ps from 0 volt to BV,
Bidirectional less than 10ns.
— High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length, 5lbs, (2.3kg) tension.
UL E223045
P600
M_MECHANICAL DATA
— Case: Molded plastic over glass passivated junction.
M^{— Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026.}
— Polarity: Color band denotes cathode except Bipolar.
— Mounting Position: Any.
— Weight: 0.07 ounce, 2.5 grams.
DEVICES FOR BIPOLAR APPLICATION
For Bidirectional use C or CA suffix for type 15KPA17 through type 15KPA280 (e.g. 15KPA17C, 15KPA280CA);
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25ć ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000ȝs waveform. (Note 1ˈFig. 1)
Peak Pulse Current on 10/1000ȝs waveform. (Note 1ˈFig. 3)
Steady State Power Dissipation at T_L =75ćˈLead length .375” (9.5mm).
( Fig. 5)
P_PPM
I_PPM
P_M(AV)
Minimum 15,000
See Table
8.0
Peak Forward Surge Currentˈ8.3ms Single Half Sine-Wave Superimposed
on Rated Load. (JEDEC Method) (Note 2, Fig. 6)
Operating Junction and Storage Temperature Range.
I_FSM
T_J , T_STG
400
-55 to +175
Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25ć per Fig. 2.
2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum.
UNIT
Watts
Amps
Watts
Amps
ć
All specifications are subject to change without notice.
1
Rev 7