HDW622 Datasheet, PDF (1/1 Pages) Mercury United Electronics Inc – Tri-state function available on pad No. 2.

Oscillators Series [ Differential LVDS ]
HDW622 series 3.3 V
SMD LVDS output
11.4 x 9.6 x 2.5 mm
Features
● Tri-state function available on pad No. 2.
Applications
● For high frequency LVDS output clock oscillators .
● " HDW " use a high-Q fundamental crystal and a multiplier circuit for low cost applications.
General Specifications
Paramenters
Input Voltage ( V_DD)
Frequency Range / Load
Output Wave Form
Output Logic High " 1 "
typical
max.
Output Logic Low " 0 "
min.
typical
Integrated Phase Noise ( 12 KHz to 20 MHz )
Rise Time ( Tr ) / Fall Time ( Tf )
Output Voltage Swing
Duty Cycle
Load
Current Consumption ( 15 pF load )
Start - Up Time (Ts)
Storage Temperature
Aging
Frequency Stability over
Operating Temperature Range
Frequency Stability ⁽¹⁾ Codes Commercial ( -10°C to +70°C )
Industrial ( -40°C to +85°C )
Electrical Spec.
3.3 V ± 5 %
750 KHz ~ 800,0 MHz
LVDS output
1.43 V ( RL = 100 Ω )
1.60 V ( RL = 100 Ω )
0.9 V ( RL = 100 Ω )
1.1 V ( RL = 100 Ω )
2.6 ps ( typical ) ; 4.0 ps ( max.)
0.6n sec.( typical ) ; 1.5 n sec. ( max.)
350 mV min. ( V_DD = +2.5V )
50% ± 10% [ 50% ± 5% is also available ]
50 Ω into Vcc - 2V or Thevenin equivalent
< 24.0 MHz
24.1 ~ 96.0 MHz
96.1 ~ 800.0 MHz
25 mA ( max. )
65 mA ( max. )
100 mA ( max. )
10 m sec.( typical )
- 50°C to 100°C
± 25 ppm
A
D
± 3 ppm per year (max.)
If non-standard , please enter the
± 50 ppm ± 100 ppm
desired stability after the " C " or " I "
For example :
B
C
" C20 " ±20 ppm over -10°C to +70°C ;
" I20 " ± 20 ppm over -40°C to +85°C
E
F
Phase Noise ( typical ) [ 156.250 MHz ]
Offset
dBc / Hz
10 Hz 100 Hz 1K Hz 10 KHz 100KHz 1 MHz 10 MHz
-60 -90 -115 -125 -119 -120 -140
Outline Dimensions ( Unit : mm )
Mercury www .mercury-crystal.com
■Taiwan : (886)-2-2406-2779 / [e-mail] ■U.S.A: (1)-909-466-0427 / [e-mail] ■China : (86)-512-5763-8100 / [e-mail]