HCK5361 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – DIFFERENTIAL HCSL OSCILLATORS

Oscillators Series [ Differential HCSL ]
HCK5361 series 2.5 V
SMD HCSL output
5.0 x 3.2 x 1.2 mm
Features
● Ultra Small SMD seam sealed clock crystal oscillator units.
● Tri-state function available on pad No. 1.
Applications
● HCK femto second integrated phase jitter ( 200 fs typical , 12 KHz to 20 MHz ) .
● HCK supeior phase noise ( -138 dBc/Hz at 10 KHz and -144 dBc/Hz at 100 KHz offset ).
● 2.5 V or 3.3 V supply voltage .
General Specifications
Paramenters
Input Voltage ( V_DD)
Frequency Range / Load
Output Wave Form
min.
Output Logic High " 1 "
typical
max.
min.
Output Logic Low " 0 "
typical
max.
Integrated Phase Noise ( 12 KHz to 20 MHz )
Rise Time ( Tr ) / Fall Time ( Tf )
Output Voltage Swing
Duty Cycle
Load
Current Consumption ( 15 pF load )
Start - Up Time (Ts)
Storage Temperature
Aging
Frequency Stability over
Operating Temperature Range
Frequency Stability ⁽¹⁾ Codes Commercial ( -10°C to +70°C )
Industrial ( -40°C to +85°C )
Electrical Spec.
± 25 ppm
A
D
2.5 V ± 5 %
13.5 MHz ~ 200,0 MHz
HCSL output
550 mV
690 mV
800 mV
-160 mV
0 mV
150 mV
0.2 ps ( typical ) ; 0.5 ps ( max.)
0.3n sec.( typical ) ; 0.7 n sec. ( max.)
600 mV min. ( V_DD = +2.5V )
50% ± 10% [ 50% ± 5% is also available ]
50 Ω into Vcc - 2V or Thevenin equivalent
30 mA ( typical ) , 50 mA ( max.)
10 m sec.( typical )
- 50°C to 100°C
± 3 ppm per year (max.)
If non-standard , please enter the
± 50 ppm ± 100 ppm _{desired stability after the " C " or " I "}
For example :
B
C
" C20 " ±20 ppm over -10°C to +70°C ;
" I20 " ± 20 ppm over -40°C to +85°C
E
F
Phase Noise ( typical ) [ 156.250 MHz ]
Offset
dBc / Hz
10 Hz 100 Hz 1K Hz 10 KHz 100KHz 1 MHz 10 MHz
-75 -90 -120 -135 -142 -147 -155
Outline Dimensions ( Unit : mm )
Mercury www .mercury-crystal.com
■Taiwan : (886)-2-2406-2779 / [e-mail] ■U.S.A: (1)-909-466-0427 / [e-mail] ■China : (86)-512-5763-8100 / [e-mail]