GS14 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – 14 pin Dual-inLine Sine Wave VCXO

GS14 3.3 V ^{VCXO [ Voltage Controlled Crystal Oscillators ]}
series
Dip type True Sine wave
20.2 x 12.8 x 6.0 mm
Applications :
● High purity and low total harmonic distortion. Ideal for audio applications
General Specifications
Paramenters
Input Voltage ( V_DD)
Frequency Range
Output Wave Form
Output Level
Frequency Deviation Range
Initial Freq. Accuracy ( at 25 °C )
Control Voltage Center / Control Voltage Range
Load
Harmonics
Current Consumption ( typical )
Input Impedance
Modulation Bandwidth ( at -3 dB)
Voltage Control Range
Start - Up Time (Ts)
Linearity
Storage Temperature
Aging
Frequency Stability over
Operating Temperature Range
Frequency Stability ⁽¹⁾ Codes Commercial ( -10°C to +70°C )
Industrial ( -40°C to +85°C )
Electrical Spec.
3.3 V ± 5 %
10.0 ~ 800.0 MHz
True Sine wave output
Standard : + 3.0 dBm ( min. ) ; Tolerance : ± 1.0 dBm
Maxmum Power : + 7.0 dBm User to specify
Standard : ± 80 ppm ( min. )
To tune to the nomial frequency with Vc = 1.65V ± 0.2V
1.65 VDC / 0.3V to 3.0V
50Ω. ( Internally AC coupled )
< - 30dBc ( frequency dependent )
10.0 MHz : 9 mA 100.0 MHz : 18 mA 150.0 MHz : 19 mA
> 10 K Ω
10 KHz ( min.)
0.0 V to V_DD with control voltage center at 50% of V_DD
6.0 m sec. ( typical )
±10 % ( max.)
- 50°C to 100°C
± 3 ppm per year (max.)
If non-standard , please enter the
± 25 ppm ± 50 ppm ± 100 ppm
desired stability after the " C " or " I "
For example :
A
B
C
" C20 " ±20 ppm over -10°C to +70°C ;
" I20 " ± 20 ppm over -40°C to +85°C
D
E
F
Phase Noise ( typical ) [ 27.0 MHz at 3.3V ]
Offset
dBc / Hz
10 Hz 100 Hz 1K Hz 10 KHz 100KHz 1 MHz 10 MHz
-75 -110 -125 -132 -128 -132 -135
Outline Dimensions ( Unit : mm )
Mercury www .mercury-crystal.com
■Taiwan : (886)-2-2406-2779 / [e-mail] ■U.S.A: (1)-909-466-0427 / [e-mail] ■China : (86)-512-5763-8100 / [e-mail]