English
Language : 

GF14 Datasheet, PDF (1/1 Pages) EUROQUARTZ limited – 14 pin Dual-in-Line
GF14 VCXO [ Voltage Controlled Crystal Oscillators ]
series
3.3 V
Dip type CMOS output
20.2 x 12.8 x 6.0 mm
Phase Jitter < 1.0 ps [ 50.1 ~ 640.0 MHz ]
Applications :
● Best performance among the three. Phase jitter is less than 0.5 ps.
General Specifications
Paramenters
Input Voltage ( VDD)
Frequency Range
Output Wave Form
Initial Freq. Accuracy ( at 25 °C )
Output Logic High " 1 "
Output Logic Low " 0 "
Frequency Deviation Range
Control Voltage Center / Control Voltage Range
Integrated Phase Jitter ( 12 KHz to 20 MHz ) .
Output Load
Rise Time ( Tr ) / Fall Time ( Tf )
Duty Cycle
Current Consumption
Start - Up Time (Ts)
Input Impedance
Storage Temperature
Aging
Frequency Stability over
Operating Temperature Range
Frequency Stability (1) Codes Commercial ( -10°C to +70°C )
Industrial ( -40°C to +85°C )
Electrical Spec.
3.3 V ± 5 %
50.1 ~ 640.0 MHz
CMOS output
To tune to the nomial frequency with Vc = 1.65V ± 0.15V
90% VDD ( min. )
10% VDD ( max. )
Standard : ± 80 ppm ( min. )
1.65 VDC / 0.3 V to 3.0 V
0.4 ps ( typical ) ; 0.5 ps ( max.) for 156.250 MHz
15 pF
0.7 nSec. ( typical ) . Measured between 0.3V to 3.0V ( 15pF load )
50% ± 10% [ 50% ± 5% is also available ]
< 100 MHz : 30 mA ( max.)
100 ~ 320 MHz : 40 mA ( max.)
10 m sec. ( max.) ; 5 m sec.( typical )
60 KΩ ( min.)
- 50°C to 100°C
± 3 ppm per year (max.)
If non-standard , please enter the
± 25 ppm ± 50 ppm ± 100 ppm
desired stability after the " C " or " I "
For example :
A
B
C
" C20 " ±20 ppm over -10°C to +70°C ;
" I20 " ± 20 ppm over -40°C to +85°C
D
E
F
Phase Noise ( typical ) [ 156.250 MHz ]
Offset
dBc / Hz
10 Hz 100 Hz 1K Hz 10 KHz 100KHz 1 MHz 10 MHz
-62 -92 -120 -132 -128 -140 -150
Outline Dimensions ( Unit : mm )
Mercury www .mercury-crystal.com
■Taiwan : (886)-2-2406-2779 / sales-tw@mercury-crystal.com ■U.S.A: (1)-909-466-0427 / sales-us@mercury-crystal.com ■China : (86)-512-5763-8100 / sales-cn@mecxtal.com