PTC04-DB-922XX Datasheet, PDF (3/8 Pages) Melexis Microelectronic Systems – Daughter Board for Melexis PTC devices

PTC04-DB-922xx
Daughter Board for Melexis PTC devices
2. Board description
2.1. Board Layout
CON1
Analogue connector
CON5
Pin 1
DB-ID
CON2
Digital Connector
 CON5: Jumpers to connect the measurement sense lines immediately to the force lines. These
jumpers are needed when no force and sense is used.
 DB-ID: This ID keeps a few initial variables in mind. It allows for example to detect what DB is
connected to the programmer and if the DB is not expired.
 CON1, CON2: Analogue and Digital connector: See below for a detailed description.
 CON3: DB Connector, Connector to the application. See below for details.
 LED Indicators: 8 LED Indicators for the DB_IOdrv lines.
 13 pins Screw Terminal. It provides the same signals as the application connector.
PTC04-DB-922xx
Rev. 1.0
Page 3 of 8
Datasheet
Jan 2014