MLX90320 Datasheet, PDF (29/32 Pages) Melexis Microelectronic Systems – Automotive small sensor interface

MLX90320
Automotive small sensor interface
10 Reliability Information
This Melexis device is classified and qualified regarding soldering technology, solderability and moisture
sensitivity level, as defined in this specification, according to following test methods:
• IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification For Nonhermetic Solid State Surface Mount Devices
(classification reflow profiles according to table 5-2)
• EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
• CECC00802
Standard Method For The Specification of Surface Mounting Components (SMDs) of Assessed Quality
• EIA/JEDEC JESD22-B106
Resistance to soldering temperature for through-hole mounted devices
• EN60749-15
Resistance to soldering temperature for through-hole mounted devices
• MIL 883 Method 2003 / EIA/JEDEC JESD22-B102
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature,
temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed
upon with Melexis.
The application of Wave Soldering for SMDs is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Based on Melexis commitment to environmental responsibility, European legislation (Directive on the Restriction
of the Use of Certain Hazardous substances, RoHS) and customer requests, Melexis has installed a Roadmap to
qualify their package families for lead free processes also.
Various lead free generic qualifications are running, current results on request.
For more information on manufacturability/solderability see quality page at our website:
http://www.melexis.com/html/pdf/MLXleadfree-statement.pdf
11 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
3901090320
Rev 004
Page 29 of 32
Data Sheet
Mar/05