MLX92241LSE-AAA-008 Datasheet, PDF (10/11 Pages) Melexis Microelectronic Systems – 2-Wire Hall Effect Switch

MLX92241LSE-AAA-008
2-Wire Hall Effect Switch
11 SE (TSOT-3L) Package Information
2.75 BSC
1.60 BSC
see note 2
1.00 MAX
0.88
+0.02
- 0.03
SEATING PLANE
0.075
+0.025
- 0.050
TOP VIEW
0.50 BSC
SIDE VIEW
12° REF.
TYP.
0.10 R.
MIN.
4°^+/-4
B’
0.10 R.
MIN.
SEATING PLANE
B
0.40^+/-0.10
see note 5
0.575 REF.
END VIEW
WITH PLATING
BASE METAL
~
0.35
+0.05
- 0.10
0.30
0.45
SECTION B-B’
see note 6
Notes:
1. All dimensions are in millimeters
2. Outermost plastic extreme width does not include mold flash or
protrusions. Mold flash and protrusions shall not exceed 0.15mm
per side.
3. Outermost plastic extreme length does not include mold flash or
protrusions. Mold flash and protrusions shall not exceed 0.25mm
per side.
4. The lead width dimension does not include dambar protrusion.
Allowable dambar protrusion shall be 0.07mm total in excess of the
lead width dimension at maximum material condition.
5. Dimension is the length of terminal for soldering to a substrate.
6. Dimension on SECTION B-B’ applies to the flat section of the lead
between 0.08mm and 0.15mm from the lead tip.
7. Formed lead shall be planar with respect to one another with
0.076mm at seating plane.
Marking:
TBD
1.51
Hall plate location
0.28
Notes:
1. All dimensions are in millimeters
TOP VIEW
Package line
END VIEW
SE Pin № Name Type
1
VDD
Supply
2
TEST
I/O
3
GND
Ground
Table 2: SE Package pinout
Function
Supply Voltage pin
Analog & Digital I/O
Ground pin
Note: Test pin to be left open or connected to GND in the application
390109224108 Rev. 1
Page 10 of 11
March/12