English
Language : 

TH72016 Datasheet, PDF (1/16 Pages) Melexis Microelectronic Systems – 433MHz FSK/ASK Transmitter
TH72016
433MHz
FSK/ASK Transmitter
Features
! Fully integrated PLL-stabilized VCO
! Frequency range from 380 MHz to 450 MHz
! Single-ended RF output
! FSK through crystal pulling allows modulation
from DC to 40 kbit/s
! High FSK deviation possible for wideband data
transmission
! ASK achieved by on/off keying of internal
power amplifier up to 40 kbit/s
! Wide power supply range from 1.95 V to 5.5 V
! Very low standby current
! Microcontroller clock output
! On-chip low voltage detector
! High over-all frequency accuracy
! FSK deviation and center frequency
independently adjustable
! Adjustable output power range from
-12 dBm to +10 dBm
! Adjustable current consumption from
3.8 mA to 11.0 mA
! Conforms to EN 300 220 and similar standards
! 10-pin Quad Flat No-Lead Package (QFN)
Ordering Information
Part Number
Temperature Code
TH72016
K (-40 °C to 125 °C)
Package Code
LD (10L QFN 3x3 Dual)
Delivery Form
120 pc/tray
5000 pc/T&R
Application Examples
! General digital data transmission
! Tire Pressure Monitoring Systems (TPMS)
! Remote Keyless Entry (RKE)
! Wireless access control
! Alarm and security systems
! Garage door openers
! Remote Controls
! Home and building automation
! Low-power telemetry systems
Pin Description
FSKDTA
FSKSW
ROI
EN
CKOUT
top
TH72016
VCC
VEE
OUT
CKDIV
PSEL
bottom
10
1
9
2
8
3
7
4
6
5
General Description
The TH72016 FSK/ASK transmitter IC is designed for applications in the European 433 MHz industrial-
scientific-medical (ISM) band, according to the EN 300 220 telecommunications standard; but it can also be
used in other countries with similar standards, e.g. FCC part 15.231.
The transmitter's carrier frequency fc is determined by the frequency of the reference crystal fref. The inte-
grated PLL synthesizer ensures that carrier frequencies, ranging from 380 MHz to 450 MHz, can be
achieved. This is done by using a crystal with a reference frequency according to: fref = fc/N, where N = 32 is
the PLL feedback divider ratio.
A clock signal with selectable frequency is provided. It can be used to drive a microcontroller.
39010 72016
Rev. 006
Page 1 of 16
Data Sheet
June/07