|
MLX80153 Datasheet, PDF (1/6 Pages) Melexis Microelectronic Systems – OTP Full Bridge motor controller | |||
|
Abstract MLX80153
OTP Full Bridge motor controller
1 Features Overview
ï· Integrated motor controller
o Full Bridge NFET predriver
ï§ Double Charge pump with programmable NFET gate voltage
ï§ HS NFET and Low Side NFET control
ï§ Synchronous rectification with programmable dead time
o 3 high voltage Wake up capable IOâs on rising and falling edge
o 3 low voltage IOâs with multiple configuration options
o Automotive Supply regulator
ï§ Standard Operating range [7, 18]V, Tj=[-40, 125]C
ï§ Extended operating range [4.5, 28]V, Tj = [-40, 150]C
ï§ 45V Load dump protected
ï§ Sleep current <50uA
o Autosequence 10bit ADC with DMA avoids need for MCU interrupts to handle
sampling. Multiple input channels
ï§ Battery (VSUP) and motor supply (VDRAIN)
ï§ Internal Temperature sensor (+/-15K)
ï§ All IOâs can be configured as analog inputs.
ï§ Single shot NTC measurement with 3.3V ADC reference voltage.
o Low Side Shunt amplifier with
ï§ Programmable gain,
ï§ Programmable Overcurrent protection and Current limiting levels
ï§ Synchronised measurements with programmable blanking time.
ï· 16bit Microcontroller
o Two 16 bit timers for PWM communication
o 16 bit core timer
o 512 Byte RAM
o 128 Byte data EEPROM
o 16kB OTP Program memory (Flash for engineering samples only).
ï· TSSOP28 exposed pad package
o AECQ100 automotive qualified, HTOL at Tj = 150C
2 Target Applications
ï· High current DC motor control applications with PWM communication interface.
o Fuel pumps
o HVAC Blowers
o Engine cooling fans: dual and single fan control possible
3 Ordering Information
Part No.
MLX80153
MLX80154
Temperature Code
K (-40 to 125oC) (*)
Engineering samples
Package Code
GO (TSSOP28-EP)
(TSSOP28-EP)
Option Code
AAA 000
(*) operation up to Tj=150C possible after review of the mission profile.
Rev 2.4
Page 1 of 6
14-Jan-2014
|
▷ |