MLX10410 Datasheet, PDF (1/7 Pages) Melexis Microelectronic Systems – 8 Fold High Side Driver

Features and Benefits
Small package (SOIC20)
Short-circuit protection
Diagnostic features
Current limitation
Low-power consumption
Over-temperature protection
Direct micro controller compatible
Integrated free wheel diodes
Applications
Automotive climate Control
Dashboard
Industrial Actuator control
Ordering Information
Part No.
MLX10410
Temperature Suffix
E (-40°C to 85°C)
Package Code
DF (SOIC-20)
Option code
CA
VDD
VCC1
VCC2
ADR2
ADR1
ADR0
CEN
STROBE
DATAI
DATAO
OTB
GND
OSCILLATOR
OVER-TEMP
PROTECT
BG OVER-VOLT
PROTECT
STAND-BY
Functional Diagram
LOGIC
LOGIC
LOGIC
LOGIC
LOGIC
LOGIC
LOGIC
LOGIC
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
OUTPUT
CURRENT LIMIT
DETECT C.C.
DETECT C.C.
DETECT C.C.
DETECT C.C.
DETECT C.C.
DETECT C.C.
DETECT C.C.
DETECT C.C.
OUT7
OUT6
OUT5
OUT4
OUT3
OUT2
OUT1
OUT0
Figure 1
Description
The 10410 is a high-side driver for automotive applications. It can drive small lamps, relays, coils etc. The output current
can be up to 250mA per driver (current limit at minimum 250mA).
The IC will only react to commands on the bus if the CEN (chip enable) signal is high. The CEN signal has nothing to do
with the power down mode, the IC will react to the micro controller commands if CEN is high.
MM39LL0XX1910002₁₄x₀x140N₁₀a8mFeooldf HSeignhsoSride Driver
Rev. 003
PageR1e_Pv_aY_g.X_{e 1}
22/Aug/98 Rev 1.1 16P/AAapg_uerg/0/1₀₁₂