MA104 Datasheet, PDF (27/32 Pages) Megawin Technology Co., Ltd – USB 2.0 low speed device.

8 Demo Board Software Guide
8.1 Demo Application Description
Demo application start window as Figure 8-1.
1
2
MA104 Datasheet
Version 1.02
3
4
5
6
7
8
Figure 8-1 Demo AP Operation Window
Function buttons descriptions:
1. Write Buffer：User can write user defined data in this column. Press “Write Data” to start the sending flow.
2. Read Buffer：Show USB data received from backend device.
3. Reset Content：Clear the data in the “Write Buffer” column.
4. Connect：Connect to MA104.
5. Disconnect：Disconnect from MA104.
6. Write Data：Start to transfer user defined data to backend device.
7. Clear Content：Clear all received data in “Read Buffer” column.
8. Exit：Exit from this demo application.
Operation control flow:
Step 1: Execute DemoAp.exe (shown as Figure 8-1).
Step 2: Click “Connect” button to connect MA104. If the connection works, the “Connect” button will be disabled.
The “Disconnect” and “Write Data” buttons will become enabled. Any data being uploaded at this time
will be shown in “Read Buffer” column.
Step 3: Key in device data in “Write Buffer” column in hexadecimal.
Step 4: Click “Write Data” to send data.
Step 5: Click “Disconnect” to break the connection off.
Step 6: Click “Exit” to exit from this application program.
This document information is the intellectual property of Megawin Technology.
© Megawin Technology Co., Ltd. 2011 All right reserved.
QP-7300-03D
27/32