SIL12-1A75-71Q_09 Datasheet, PDF (1/1 Pages) Meder Electronic – SIL Reed Relay

Europe: +49 / 7731 8399 0
USA: +1 / 508 295 0771
Asia: +852 / 2955 1682
| Email: [e-mail]
| Email: [e-mail]
| Email: [e-mail]
Item No.:
3312175371
Item:
SIL12-1A75-71Q
Coil Data at 20 °C
Coil resistance
Coil voltage
Rated power
Pull-In voltage
Drop-Out voltage
Conditions
Contact data 75
Contact-form
Contact-material
Contact rating
Switching voltage (<31 AT)
Switching current
Carry current
Contact resistance static
Contact resistance dynamic
Insulation resistance
Breakdown voltage (20-30 AT)
Operate time incl. bounce
Release time
Capacity
Conditions
not to exceed their individual max.'s
DC or Peak AC
DC or Peak AC
DC or Peak AC
! " # $ % !"! %
Start Value
&
%'
!&
Start Value
RH <45 %, 100 V test voltage
according to IEC 255-5
measured with 40% overdrive
measured with no coil excitation
@ 10 kHz across open switch
Special Product Data
Insulation resistance Coil/Contact
Insulation voltage Coil/Contact
Housing material
Connection pins
Conditions
RH <45%, 200 VDC test voltage
according to IEC 255-5
Environmental data
Shock
Vibration
Ambient temperature
Storage temperature
Soldering temperature
Cleaning
Conditions
1/2 sine wave duration 11ms
from 10 - 2000 Hz
wave soldering max. 5 sec.
Min
Typ
Max
Unit
Min
Typ
Max
Unit
A
Rhodium
Min
Min
/
/0
(
Typ
Max
mineral filled epoxy
FeNi alloy tin plated
Typ
Max
.
fully sealed
)*
Unit
(
+
Unit
,
,
-
-
Modifications in the sense of technical progress are reserved
Designed at:
08.03.04 Designed by:
SCHELLHORN
Last Change at: 20.07.09 Last Change by: KSCHIELENSKI
Approval at:
Approval at:
31.10.08
20.07.09
Approval by:
Approval by:
KOLBRICH
KOLBRICH
Version: 3