SIL05-1B72-71D Datasheet, PDF (1/1 Pages) Meder Electronic – SIL Reed Relay

Headquarter Europe
MEDER electronic AG
Friedrich-List Strasse 6
D-78234 Engen-Welschingen
Tel.: [phone]
Fax: [phone]
eMail: [e-mail]
Internet: www.meder.com
Headquarter USA
MEDER electronic Inc.
766 Falmouth Rd
Mashpee, MA 02649
Phone: [phone]
Fax: [phone]
eMail: [e-mail]
Reed Relay:
Part Number:
SIL05-1B72-71D
3305072171
Dimensions (tolerance ± 0,1mm)
Layout 71D/ Pitch 2,54 / Top View
Marking
Type -Layout
Production -Code-
EN60062
Coil/Relay Characteristics
Coil Resistance
Nominal Voltage
Nominal Rated Power
Thermal Resistance
Operate Voltage
Release Voltage
Return Voltage
Contact Data x (Form x/Dry)
Contact Rating
Switching Voltage
Switching Current
Carry Current
Static Contact Resistance (initial)
Insulation Resistance
Breakdown Voltage
Operate Time, including Bounce
Release Time
Capacitance
Environmental Data
Insulation Resistance Coil to Contact
Dielectric Strength Coil to Contact
Shock
Vibration
Operating Temperature
Storage Temperature
Soldering Temperature
Cleaning
Material of Case
Material of Pins
Conditions at 20°C
Min.
450
0,75
6,5
Typ.
500
5,0
50
110
Max.
550
3,5
Units
W
VDC
mW
K/W
VDC
VDC
VDC
Any combination of the switching voltage
and current must not exceed the given
15
W
rated power
DC or Peak AC
200
V
DC or Peak AC
1,0
A
DC or Peak AC
1,25
A
Measured with Nominal Voltage
RH 45%
10¹⁰
150
mW
W
250
VDC
Measured with Nominal Voltage
0,5
ms
Measured with no coil suppression
0,1
ms
0,3
pF
RH 45%
½ sine wave, duration 11ms
from 10 - 2000 Hz
10°C/min max. allowable
10°C/min max. allowable
5 sec. at
10¹¹
W
1,5
kV AC
150
g
10
g
-20
70
°C
-35
95
°C
260
°C
fully sealed
mineral-filled epoxy
FeNi-alloy tinned
Modifications in the sense of technical progress are reserved DESIGNED BY:
Page 1 of 1 [VRRp-02.doc] REVISION / Rev. No.: 00 REVISED BY:
Klaus Mueller
APPROVED BY:
APPROVED BY:
Rudi Rippl
DATE : 2002-05-24
DATE :