MK14-1C90E-500W Datasheet, PDF (1/1 Pages) Meder Electronic – MK Reed Sensors

Europe: +49 / 7731 8399 0
USA: +1 / 508 295 0771
Asia: +852 / 2955 1682
| Email: [e-mail]
| Email: [e-mail]
| Email: [e-mail]
Item No.:
9145903054
Item:
MK14-1C90E-500W
Magnetic properties
Pull-In
Test equipment
Special Product Data
Contact - form
Contact rating
Switching voltage
Carry current
Switching current
Sensor-resistance
Housing material
Case colour
Sealing compound
Environmental data
Operating temperature
Operating temperature
Storage temperature
Safety class
Shock
Vibration
Cable specification
Cable type
Overall length cable
Cable material
Cross section
General data
Mounting advice
Mounting advice
Mounting advice
Conditions
at 20°C
Conditions
not to exceed their individual max.'s
DC or Peak AC
DC or Peak AC
DC or Peak AC
measured with 40% overdrive
Conditions
cable not moved
cable moved
DIN EN 60529
1/2 sine wave duration 11ms
from 10 - 2000 Hz
Conditions
Tolerance according to drawing
Conditions
Min
Typ
Max
KMS-13
Min
Typ
Max
Form C - Changeover
Unit
Unit
Min
PBT glass fibre reinforced
black
Polyurethan
Typ
Max
Unit
Min
Typ
Max
Unit
single wires
PVC
0,14 sq-mm
Min
Typ
Max
Unit
Decreased switching distances by mounting on iron.
Magnetically conductive screws must not be used.
over 5m cable, a resistor is recommended.
Modifications in the sense of technical progress are reserved
Designed at:
18.03.09
Last Change at:
Designed by:
Last Change by:
MPOTUZAK
Approval at:
Approval at:
19.03.09
Approval by:
Approval by:
DSTASTNY
Version: 05