FSC5002U Datasheet, PDF (1/2 Pages) Meder Electronic – HOUSING AND RETAINER RING MATERIAL: POLYPROPYLENE, BLACK

BOM FOR PACKAGE
ITEM
QTY.
SENSOR
1
ADJUSTMENT NUT
2
BRACKET
1
WIRE: 6 FEET
MARKING LOCATION
NOTES:
DRAIN PAN BRACKET
1. FLOAT MATERIAL: POLYPROPYLENE, WHITE
2. HOUSING AND RETAINER RING MATERIAL: POLYPROPYLENE, BLACK
3. BRACKET MATERIAL: 22 GA, 304 2B STAINLESS STEEL
4. O-RING MATERIAL: SILICONE
5. OPERATING TEMPERATURES UP TO 70°C
6. STORAGE TEMPERATURE UP TO 105°C
7. ELECTRICAL CHARACTERISTICS:
1.13"
- POWER RATING (MAX)
50VA
- SWITCHING VOLTAGE (MAX) 200 VDC, 150 VAC
- BREAKDOWN VOLTAGE (MIN) 250VDC
- CONTACT ARRANGEMENT
SPST
- SWICHING CURRENT (MAX)
1.5 A DC, 1.5 A AC
- CARRY CURRENT (MAX)
2.5 A DC, 2.5 A AC
- CONTACT RESISTANCE
100 m
- INSULATION RESISTANCE (MIN) 10¹²
- SWITCH AGENCY LISTED
UL E122752
8. WIRE CONNECTIONS: 18AWG UL1007/1569 OR UL2468
9. FLOAT SPECIFIC GRAVITY: 0.75 (REFERENCE ONLY)
10. PLASTIC MATERIAL REGULATORY COMPLIANCE: FDA, RoHS, UL
11. CONFORMS TO UL508
12. MUST PASS MINUMUM OF 30 LBS. WIRE PULL TEST USING DEAD
WEIGHT FOR ONE MINUTE
INSTALLATION INSTRUCTIONS
* SLIDE BRACKET CLIP OVER SIDE OF PAN
* SECURE BRACKET WITH TAPE AS NEEDED
WATER LEVEL @
SENSOR ACTIVATION
.56" ±.09
* ADJUST THREAD POSITION TO SET SENSOR ACTIVATION HEIGHT
* REMOVE SENSOR TO CLEAN & INSPECT
ADJUSTMENT NUT
DRAWING NUMBER
REV.
FSC 5002U 3
ADJUSTMENT NUT
SENSOR
1.02"
MARKING
DETAIL
2.18"
O .80"
TOLERANCES
When Unspecified
Inches
2 Place Dec.
3 Place Dec.
+- .01
-+ ^.005
Fractions -+
Millimeters
1 Place Dec. ^+-
2 Place Dec.
Angles
-+
-+ ^1°
Scale :
N/A
This drawing and the information and technical data contained hereon,
are confidential and proprietary to Standex Electronics and shall
not be used in whole or in part without Standex
written consent
TITLE
FPS-B
Dwn.
App'd.
Standex
Electronics
DATE
CCR
4/2/2012
DCJ
4/3/2012
a Standex company
CINCINNATI
OHIO
DRAWING NUMBER
REV.
FSC 5002U 3