FPSC5002U Datasheet, PDF (1/2 Pages) Meder Electronic – FLOAT MATERIAL: POLYPROPYLENE, WHITE

BOM FOR PACKAGE
ITEM
QTY.
SENSOR
1
ELBOW 90°
1
SPIGOT
1
NPT BUSHING
1
WARNING LABEL
1
INSTRUCTIONS
1
* ITEMS REQUIRED FOR ASSEMBLY
- PVC CEMENT
- TEFLON TAPE
INSTALLATION INSTRUCTIONS
* REMOVE SENSOR PRIOR TO INSTALLATION
* DO NOT GLUE SENSOR TO HOUSING
* PLUG DRAIN AND FILL PAN TO CONFIRM
SENSOR FUNCTION AFTER INSTALLATION
* REMOVE SENSOR TO CLEAN & INSPECT
3/4" NPT SPIGOT
1" TO 3/4" NPT
THREADED BUSHING
SENSOR
DRAWING NUMBER
REV.
FPSC 5002U 3
WIRE: 6 FEET
NOTES:
1. FLOAT MATERIAL: POLYPROPYLENE, WHITE
2. HOUSING AND RETAINER RING MATERIAL: POLYPROPYLENE, BLACK
3. O-RING MATERIAL: SILICONE
4. OPERATING TEMPERATURES UP TO 70°C
5. STORAGE TEMPERATURE UP TO 105°C
6. ELECTRICAL CHARACTERISTICS:
- POWER RATING (MAX)
50VA
- SWITCHING VOLTAGE (MAX) 200 VDC, 150 VAC
- BREAKDOWN VOLTAGE (MIN)
- CONTACT ARRANGEMENT
- SWICHING CURRENT (MAX)
- CARRY CURRENT (MAX)
250VDC
SPST
1.5 A DC, 1.5 A AC
2.5 A DC, 2.5 A AC
.09" ±.10
WATER LEVEL @
SENSOR ACTIVATION
- CONTACT RESISTANCE
100 m
- INSULATION RESISTANCE (MIN) 10¹²
PIPE CENTERLINE
- SWITCH AGENCY LISTED
UL E122752
7. WIRE CONNECTIONS: 18AWG UL1007/1569 OR UL2468
8. FLOAT SPECIFIC GRAVITY: 0.75 (REFERENCE ONLY)
9. PLASTIC MATERIAL REGULATORY COMPLIANCE: FDA, RoHS, UL
10. CONFORMS TO UL508
11. MUST PASS MINIMUM OF 30 LBS. WIRE PULL TEST USING DEAD
WEIGHT FOR ONE MINUTE
1" PVC ELBOW
MARKING LOCATION
MARKING
DETAIL
2.18"
1.06"
2.50"
TOLERANCES
When Unspecified
Inches
2 Place Dec.
3 Place Dec.
+- .XX
-+ ^.XXX
Fractions -+ ^X/X
Millimeters
1 Place Dec. ^{+- .X}
2 Place Dec. -+ ^.XX
Angles
-+ ^X°
Scale :
N/A
This drawing and the information and technical data contained hereon,
are confidential and proprietary to Standex Electronics and shall
not be used in whole or in part without Standex
written consent
TITLE
FPS-L
Dwn.
App'd.
Standex
Electronics
DATE
CCR
4/2/2012
DCJ
4/3/2012
a Standex company
CINCINNATI
OHIO
DRAWING NUMBER
REV.
FPSC 5002U 3