SLC03 Datasheet, PDF (3/4 Pages) Mean Well Enterprises Co., Ltd. – 3W DIP Package DC-DC Regulated Converter

SLC03 & DLC03 ^{3W DIP Package DC-DC Regulated Converter}
series
SPECIFICATION
VOLTAGE RANGE
A: 9~18Vdc , B: 18~36Vdc , C: 18~75Vdc
SURGE VOLTAGE (100ms max.) 12Vin models : 25Vdc ; 24Vin models : 50V ; 48Vin models : 100Vdc
INPUT
FILTER
Internal capacitor
PROTECTION
Fuse recommended. 12Vin models: 1A Slow-Blow Type, 24Vin models: 0.5A Slow-Blow Type, 48Vin models: 200mA Slow-Blow Type
INTERNAL POWER DISSIPATION 1000mW
VOLTAGE ACCURACY ±2%
RATED POWER
3W
OUTPUT
RIPPLE & NOISE Note.2 50mVp-p
LINE REGULATION Note.3 ±0.2%
LOAD REGULATION Note.4 ±0.5%
SWITCHING FREQUENCY (Typ.) 100KHz
SHORT CIRCUIT
Protection type : Continuous, automatic recovery
OVERLOAD
PROTECTION
150 ~ 250% rated output power
Protection type : Recovers automatically after fault condition is removed
Start-up voltage
UNDER VOLTAGE LOCKOUT
Shutdown voltage
COOLING
Free-air convection
12Vin: 8.8Vdc, 24Vin: 17Vdc, 48Vin: 34Vdc
12Vin: 7Vdc, 24Vin: 14Vdc, 48Vin: 30Vdc
WORKING TEMP.
CASE TEMPERATURE
-40 ~ +85℃ (Refer to "Derating Curve")
+100℃ max.
WORKING HUMIDITY 20% ~ 90% RH non-condensing
ENVIRONMENT _{STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH non-condensing}
TEMP. COEFFICIENT
0.03% / ℃ (0 ~ 80℃)
SOLDERING TEMPERATURE 1.5mm from case of 3 ~ 5sec./265℃ max.
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
WITHSTAND VOLTAGE I/P-O/P:1.5KVDC
ISOLATION RESISTANCE _{I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH}
ISOLATION CAPACITANCE (Typ.) _80pF
Parameter
Standard
Test Level / Note( Note.6)
EMC EMISSION
Conducted
EN55032(CISPR32)
N/A
SAFETY &
EMC
( Note.5)
Radiated
Parameter
ESD
EN55032(CISPR32)
Standard
EN61000-4-2
Class B
Test Level / Note
Level 3, ±8KV air
EMC IMMUNITY
Radiated Susceptibility
EFT/Burest
EN61000-4-3
EN61000-4-4
Level 2, 3V/m
Level 1, 0.5KV
Surge
EN61000-4-5
Level 2, 0.5KV Line-Line
Conducted
EN61000-4-6
Level 2, 3V
Magnetic Field
EN61000-4-8
Level 1, 1A/m
MTBF
300Khrs min. MIL-HDBK-217F(25℃)
OTHERS
NOTE
DIMENSION (L*W*H)
22.1*13.8*8.55mm (0.87*0.54*0.34 inch)
CASE MATERIAL
Non-Conductive black plastic (UL 94V-0 rated)
PACKING
4.5g
1.All parameters are specified at normal input(A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please
refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
6.An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: 220uF/100V.
File Name:SLC03,DLC03-SPEC 2017-06-21